- Subject (1533)
- 4. Materials Science, Mechanics and Mechanical Engineering (410)
Number of items: 410.
2007
Baudoin, Aurélien (2007) Pre and post operative analysis of the hip using 3D reconstructions from biplanar low dose X-rays. PhD thesis Biomécanique, ENSAM 2007ENAM0033 p.177.
Bellenger, Hugo (2007) The role of ocean-atmosphere interaction in the tropical convective intraseasonal variability. PhD thesis LMD, EP - LMD, EP/X p.206.
Bilat, Anne-Sophie (2007) Estimation du risque de rupture fragile de soudures de pipelines en aciers à haut grade : caractérisation et modélisation. PhD thesis Sciences et génie des matériaux, Centre des Matériaux P.M. Fourt, ENSMP p.300.
Bohic, Marianne (2007) Surface characterization of pigments treated by acrylic polyesters. PhD thesis Sciences et Génie des Matériaux, ENSMP - CEMEF Centre de Mise en Forme des Matériaux, ENSMP p.181.
Bongué Boma, Malika (2007) Crack modelling for the assessment of stiffness loss of reinforced concrete structures under mechanical loading. PhD thesis, ENPC p.245.
Cassarini, Stéphane (2007) Lubricant film modelling in the inlet zone for cold strip rolling lubrication by emulsions. PhD thesis Sciences et Génie des Matériaux, CEMEF- Centre de Mise en Forme des Matériaux, ENSMP p.199.
Cerri, Olivier (2007) Hot tearing in steels during solidification. Experimental characterization and thermomechanical modeling. PhD thesis Sciences et Génie des Matériaux, CEMEF- Centre de mise en forme des matériaux, ENSMP p.204.
Champin, Cédric (2007) 3D Modeling of the infrared radiation reheating step and the stretch blow molding of cold injected preforms used for P.E.T. bottles. PhD thesis Sciences et Génie des Matériaux, CEMEF- Centre de mise en forme des matériaux, ENSMP p.221.
Chatzigogos, Charisis (2007) A rational approach for the seismic behavior of shallow foundations : consideration of a performance-based criterion in the design. PhD thesis LMS, LMS, EP/X p.346.
Chaudemanche, Cyril (2007) Polysaccharides, an alternative for the development of a new plant hard capsule. PhD thesis Sciences et Génie des Matériaux, ENSMP - CEMEF Centre de Mise en Forme des Matériaux, ENSMP p.269.
Coquillat, Marie (2007) Ageing of polybutadiene based propellants : kinetic modelling of oxidation. PhD thesis Mécanique et Matériaux, ENSAM 2007ENAM0021 p.186.
Dallot, Julien (2007) Limit analysesof multilayered structures. PhD thesis, ENPC p.210.
Dalloz, Alexandre (2007) Study of the damage induced by the shear cutting process in dual phase steels for automotive application. PhD thesis Sciences et génie des matériaux, MAT- Centre des Matériaux P.M. Fourt, ENSMP p.193.
Delqué, Mélissa (2007) Influence of microstructure on the tribological behaviour of composite coatings obtained by plasma spraying. PhD thesis Sciences et génie des matériaux, MAT- Centre des Matériaux P.M. Fourt, ENSMP p.178.
Duplessis Kergomard, Yann (2007) Experimental and numerical study about intralaminar fissuration and free edge delamination on pseudo woven laminated composites structures. PhD thesis Sciences et génie des matériaux, MAT-Centre des Matériaux P.M. Fourt, ENSMP p.237.
Fedala, Djaafer (2007) Modeling of broadband noise radiated by an airfoil : application to turbomachinery. PhD thesis Mécanique, ENSAM 2007ENAM0034 p.160.
Fournier, Benjamin (2007) Fatigue-fluage des aciers martensitiques à 9-12%Cr : comportement et endommagement. PhD thesis Sciences et génie des matériaux, Centre des Matériaux P.M. Fourt, ENSMP p.525.
Gavillon, Roxane (2007) Preparation and characterization of ultra porous cellulosic materials. PhD thesis Sciences et Génie des Matériaux, ENSMP - CEMEF Centre de Mise en Forme des Matériaux, ENSMP p.235.
Gheorghe, Lucian (2007) Les oxoborates non linéaires Gd1-xRxCa4O(BO3)3, R = (Lu, Sc, Nd) : croissance cristalline et propriétés optiques. PhD thesis Sciences des Matériaux, Laboratoire de Chimie de la Matière Condensée de Paris, ENSCP p.196.
Guegan, Alan (2007) Optimal perturbations in swept leading edge boundary layers. PhD thesis LADX, LADX, EP/X p.0.
Guo, Baoqiao (2007) Simultaneous identification of stiffness and damping parameters from full field measurements on isotropic vibrating plates by the virtual fields method. PhD thesis mécanique, ENSAM 2007ENAM0010 p.196.
Haddag, Badis (2007) Contribution to the modelling of sheet metal forming : application to spring-back and localization. PhD thesis Mécanique, ENSAM 2007ENAM0002 p.203.
Hennebelle, François (2007) Determination of measurements uncertainties on coordinate measuring machines application to gears. PhD thesis Mécanique et Matériaux, ENSAM 2007ENAM0035 p.275.
Huang, Wenjun (2007) Grain scale stresses and strains determination by X-ray. PhD thesis Génie mécanique et matériaux, ENSAM 2007ENAM0003 p.142.
Jolivet, Erwan (2007) Biomechanical modelisation of hip for hip fracture risk. PhD thesis Biomécanique, ENSAM 2007ENAM0019 p.176.
Jourieh, Munif (2007) Development of a representative model of a wind turbine in order to study the installation of several machines on a wind park. PhD thesis Mécanique, ENSAM 2007ENAM0032 p.149.
Kaminski, Myriam (2007) Fatigue damage modelling of single crystal turbine blades containing stress concentration regions. PhD thesis Sciences et génie des matériaux, Centre des Matériaux P.M. Fourt, ENSMP p.254.
Karimi-jafari, Mehdi (2007) Long-Term behavior of deep caverns. PhD thesis LMS, LMS, EP/X p.225.
Karrech, Ali (2007) Behaviour of granular materials under vibration : application to the ballast of rail way platforms. PhD thesis, ENPC p.212.
Labeguerie-egea, Jessica (2007) Synthèses par chimie douce de fluorures dopés terres rares pour applications optiques. PhD thesis chimie inorganique, Laboratoire de chimie de la matière condensée de paris - ENSCP, ENSCP p.192.
Le lan, Jean-Vincent (2007) A study on simplified methods for machining simulation at a macroscopic scale. PhD thesis Mécanique, ENSAM 2007ENAM0045 p.142.
Lê, Ngoc Dong (2007) Regulation of concrete production. PhD thesis, ENPC p.243.
Leboeuf, Mathilde (2007) Influence of mixing conditions on rheological behaviour and electrical conductivity of Polyamides filled with carbon black. PhD thesis Sciences et Génie des Matériaux, CEMEF- Centre de mise en forme des matériaux, ENSMP p.246.
Lopez, Cédric (2007) Optimization methods for helicopter landing gears. PhD thesis Conception, LSIS, ENSAM 2007ENAM0038 p.175.
Maalej, Yamen (2007) Mechanical behaviour of a grouted granular medium: Experimental study and micromechanical modelling. PhD thesis, ENPC.
Mareau, Charles (2007) Micromechanical modeling of self-heating and microplasticity in steels under cyclic loading. PhD thesis Mécanique et Matériaux, Laboratoire de Physique et Mécanique des Matériaux, ENSAM 2007ENAM0037 p.216.
Mazière, Matthieu (2007) Burst of turboengine disks. PhD thesis Sciences et génie des matériaux, Centre des Matériaux P.M. Fourt, ENSMP p.159.
Missoum Benziane, Djamel (2007) A new fully coupled two-scales modelling for mechanical problems involving microstructure : the 95/5 technique. PhD thesis Mécanique, ENSAM 2007ENAM0007 p.127.
Mohammadkhani-Shali, Soheil (2007) Study of systeme redundancy in bridges : failure machanism analysis using response surface methods. PhD thesis, ENPC p.197.
Moulart, Raphaël (2007) Development and implementation of a full-field strain measurement method at the micrometric scale. PhD thesis Mécanique, ENSAM 2007ENAM0031 p.160.
Nguyen, Tien Minh (2007) Non linear dynamic of coupled machanical systems: model reduction and identification. PhD thesis, ENPC p.181.
Quaegebeur, Nicolas (2007) Non linearities and influence of the material in sound restitution by an electrodynamic laudopeakes. PhD thesis Matériaux, Mécanique, ENSTA, EP/X p.206.
Quintas, Arnaud (2007) Etude de la structure et du comportement en cristallisation d’un verre nucléaire d’aluminoborosilicate de terre rare. PhD thesis Chimie Inorganique, LCMCP-ENSCP, ENSCP p.246.
Rey, Benoit (2007) Multigrid method for large deformations and numerical simulation of the ring rolling process. PhD thesis Mécanique Numérique, CEMEF - Centre de Mise en Forme des Matériaux, ENSMP p.142.
Robert, Yannick (2007) Simulation numérique du soudage du TA6V par laser YAG impulsionnel : caractérisation expérimentale et modélisation des aspects thermomécaniques associés à ce procédé. PhD thesis Sciences et génie des matériaux, Centre des Matériaux P.M. Fourt, ENSMP p.245.
Rousseau, Marc-Antoine (2007) Cervical disc arthroplasty : evaluation methods and biomechanical analysis. PhD thesis Biomécanique, ENSAM 2007ENAM0020 p.96.
Rupin, Nicolas (2007) Theoritical modelling for hot forming two phase metal compared to experimental results. PhD thesis LMS, LMS, EP/X p.0.
Sellès, Olivier (2007) Halogénures de lanthane dopés cérium Des scintillateurs rapides pour l'imagerie médicale. PhD thesis Sciences des Matériaux, ENSCP.
Sidlof, Petr (2007) Fluid-structure interaction in human vocal folds. PhD thesis Scientific and technical calculations, ENSTA / UME - Laboratoire de Mécanique, ENSTA.
Singland, Jean-Dominique (2007) Mechanical and clinical evaluation of home made abdominal aortic endograft. PhD thesis Biomécanique, ENSAM 2007ENAM0012 p.132.
Siska, Filip (2007) Continuum vs. dislocation dynamics modelling of thin films. PhD thesis Sciences et génie des matériaux, Centre des Matériaux P.M. Fourt, ENSMP p.195.
Stoelinga, Christophe N.J. (2007) A psychomechanical study of rolling sounds. PhD thesis Acoustique, ENSTA / UME - Laboratoire de Mécanique, ENSTA.
Südhoff, Ingrid (2007) Geometrical and mechanical patient specific modeling of the locomotor system. PhD thesis Biomécanique, ENSAM 2007ENAM0029 p.258.
Tang, Zhenzhong (2007) Polishing and skid-resistance of road surfaces. PhD thesis, ENPC p.276.
Triconnet, Karen (2007) Mechanical properties identification from full-filled measurement in a multi-phase material. PhD thesis Mécanique, ENSAM 2007ENAM0014 p.222.
Willot, François (2007) Contribution to the study of plastic localization in porous media. PhD thesis LMS/CEA, EP - LMS Laboratoire de Mécanique des Solides/CEA, EP/X p.312.
Wronski, Sebastian (2007) Examination of residual stresses in heterogeneous textured materials using diffraction and deformation models. PhD thesis Mécanique et Matériaux, Université de sciences et technologie AGH de Cracovie, ENSAM 2007ENAM0017 p.160.
Xavier, José (2007) Characterisation of the wood stiffness variability within the stem by the virtual fields method : application to P.pinaster in the LR plane. PhD thesis Mécanique, ENSAM 2007ENAM0030 p.151.
Younsi, Mohand (2007) Numerical and experimental unsteady flow and aeroacoustic behavior of forward centrifugal fans. PhD thesis Mécanique, ENSAM 2007ENAM0027 p.156.
2006
Bastard, Myriam (2006) Durability thermoplastic pieces: application to polyoxymethylene. PhD thesis Mécanique et Matériaux, ENSAM 2006ENAM0003.
Bastier, Arnaud (2006) Modelling of friction stir welding of aluminium alloys. PhD thesis LMS, EP - LMS Laboratoire de Mécanique des Solides - ENSTA / UME - Laboratoire de Mécanique, EP/X p.158.
Baudouin, Cyrille (2006) Contribution to the qualification of a manufacturing process by a dimensional approach : application to "net shape" formed bevel gears. PhD thesis Génie mécanique, ENSAM 2006ENAM0048.
Ben Mekki, Othman (2006) Amortissement semi-actif des structures flexibles. PhD thesis, ENPC p.196.
Benabes, Jérôme (2006) Non local energy fatigue life calculation approach of structures in multiaxial fatigue under variable amplitude loadings : application to a railway wheel. PhD thesis Mécanique, ENSAM 2006ENAM0069 p.231.
Bennani, Amine (2006) Elaboration, comportement et durée de vie en fatigue du caoutchouc naturel renforcé de silice. PhD thesis Sciences et génie des matériaux, ENSMP - Centre des Matériaux P.M. Fourt, ENSMP.
Beringhier, Marianne (2006) Distribution et transport des variables de modèles polycristallins pour la prédiction de l'anisotropie mécanique des métaux en mise en forme. PhD thesis Mécanique Numérique, ENSMP - CEMEF Centre de Mise en Forme des Matériaux, ENSMP.
Berrahmoune, Mohamed Reda (2006) Martensitic transformation and delayed cracking phenomenon in the 301LN unstable austenitic steel. PhD thesis Mécanique et Matériaux, ENSAM, ENSAM 2006ENAM0041 p.186.
Bodiguel, Hugues (2006) Propriétés mécaniques de films polymères ultraminces. PhD thesis Physique des liquides, Physique, ESPCI.
Bonin, Vincent (2006) Analytical modelling of chip formation during beech green wood rotary veneer cutting process. PhD thesis Mécanique, ENSAM 2006ENAM0022.
Bouvard, Jean-Luc (2006) Crack growth modelling in the single-crystal turbine blades. PhD thesis Sciences et Génie des matériaux, ENSMP - Centre des Matériaux P.M. Fourt, ENSMP.
Bruyère, Jérôme (2006) Bevel gear design: anlaysis and synthesis of geometry and tolerances. PhD thesis Mécanique et génie mécanique, ENSAM 2006ENAM40.
Caciu, Costin (2006) Analyse et optimisation des surfaces des chemises de moteurs thermiques. PhD thesis Morphologie Mathématique, CMM - Centre de Morphologie Mathématique, ENSMP p.263.
Charpail, Estelle (2006) Mechanical behavior analysis of human ribs in dynamics. PhD thesis Mécanique, ENSAM 2006ENAM0036 p.300.
Chérault, Nathalie (2006) Caractérisation et modélisation thermomécanique des couches d'interconnexions dans les circuits sub-microélectroniques. PhD thesis Sciences et génie des matériaux, ENSMP - Centre des Matériaux P.M. Fourt, ENSMP.
Chevalot, Nicolas (2006) Analysis and simulation of in seated human prehensible and reaching movements for ergonomic uses. PhD thesis Biomécanique, ENSAM 2006ENAM0066.
Clabaux, Nicolas (2006) Prevention traffic risks in towns: contribution to the devlopment and assessment of diagnosis assistanve tools using prototypal accident scenarios. PhD thesis, ENPC.
Comby peyrot, Isabelle (2006) Development and Validation of a 3D Computational Tool to describe Damage and Fracture due to Alkali-Silica Reaction in Concrete Structures. PhD thesis Mécanique Numérique, ENSMP - CEMEF Centre de Mise en Forme des Matériaux, ENSMP.
Comte, François (2006) Fatigue design of the cylinder head : heat treatment modeling and new methods developpement. PhD thesis Mécanique , EP - LMS Laboratoire de Mécanique des Solides - ENSTA / UME - Laboratoire de Mécanique, EP/X p.141.
Corduan, Nolwenn (2006) Study of vibratory behaviour of thin walled parts in finishing milling operations : application on blades of high pressure aeronautical turbo compressor. PhD thesis Génie mécanique, ENSAM 2006ENAM0011 p.139.
Corté, Laurent (2006) Renforcement des polymères semi-cristallins. PhD thesis Chimie et Physico-chimie des polymères, Matière Molle et Chimie, ESPCI.
Croston, Tania (2006) Experimental study of short reinforced concrete beam behavior repaired by two fiber reinforced polymer methods through three points bending test (probabilistic approach). PhD thesis Mécanique, ENSAM 2006ENAM0017 p.242.
Cuissinat, Céline (2006) Swelling and dissolution mechanisms of native cellulose fibres. PhD thesis Sciences et Génie des Matériaux, ENSMP - CEMEF Centre de Mise en Forme des Matériaux, ENSMP p.160.
Dakhlaoui, Rim (2006) Analyze of phase's mechanical behaviour of a multiphase polycristalline alloy by X-ray and neutron diffraction. PhD thesis Mécanique et Matériaux, ENSAM 2006ENAM0044.
Deloye, Elise (2006) Effet de l'architecture de chaine sur le comportement en injection soufflage de copolyesters PET - Etude expérimentale. PhD thesis Sciences et Génie des Matériaux, ENSMP - CEMEF Centre de Mise en Forme des Matériaux, ENSMP.
Denaud, Louis Etienne (2006) Vibro-acoustic analysis of the peeling process. PhD thesis Mécanique, ENSAM 2006ENAM0043.
Devisme, Samuel (2006) Contribution to the study of extrusion coating of polypropylene onto aluminium. PhD thesis Sciences et Génie des Matériaux, ENSMP - CEMEF Centre de Mise en Forme des Matériaux, ENSMP p.207.
Dick, Thomas (2006) Modélisation multiéchelle du phénomène de fretting dans le contact aube-disque. PhD thesis Sciences et génie des matériaux, ENSMP - Centre des Matériaux P.M. Fourt, ENSMP.
Dieye, Mamadou (2006) Dynamic behavior of the worpiece/tool/machine (WTM) in creep feed grinding process. PhD thesis Génie mécanique, ENSAM 2006ENAM0020 p.151.
Diolez, Gilles (2006) Geometric position control : towards new tools more efficient. PhD thesis Génie mécanique, ENSAM 2006ENAM0029.
Do, Tien Tho (2006) Optimisation de forme en forgeage 3D. PhD thesis Mécanique Numérique, ENSMP - CEMEF Centre de Mise en Forme des Matériaux, ENSMP.
Dray Bensahkoun, Delphine (2006) Predictin of the thermoelastic properties of an injection molded short-fiber composite. PhD thesis Mécanique et matériaux, ENSAM 2006ENAM0008.
Duchemin, Laure (2006) Personalized finite element modelling of the proximal femur for fracture risk prediction. PhD thesis Mécanique, ENSAM 2006ENAM0010.
Egal, Magali (2006) Structure and properties of cellulose/NAOH aqueous solutions, gels and regenerated objects. PhD thesis Science et génie des matériaux, CEMEF - Centre de Mise en Forme des Matériaux, ENSMP p.243.
El arem, Saber (2006) Non linear vibrations of cracked structures: Application to turbines rotors. PhD thesis, ENPC.
Falissard, Fabrice (2006) Vorticity preserving numerical schemes in compressible aerodynamics. PhD thesis Mécanique, ENSAM 2006ENAM0005.
Ferjani, Mohammed (2006) Integration of dynamical phenomena in the fatigue analysis of drillstrings. PhD thesis LMS, EP - LMS Laboratoire de Mécanique des Solides, EP/X p.0.
Germain, Guenaël (2006) A contribution towards the optimisation of Laser Assisted Machining. PhD thesis Mécanique, matériaux et procédés, ENSAM 2006ENAM0051.
Germain, Norbert (2006) Modélisation non locale de l'endommagement dans les structures composites. PhD thesis Sciences et génie des matériaux, Centre des Matériaux P.M. Fourt, ENSMP p.188.
Gille, Olivier (2006) Tool for evaluating trunk muscles using MRI: application to study of posture and muscular lesions secondary to surgery. PhD thesis Biomécanique, ENSAM 2006ENAM0054.
Goto, Tania (2006) Influence des paramètres moléculaires du latex sur l'hydratation, la rhéologie et les propriétés mécaniques des composites ciment/latex. PhD thesis Physique et chimie des matériaux, NULL, ESPCI.
Goujon, Hélène (2006) Gait analysis of transfemoral amputee. PhD thesis Mécanique, ENSAM 2006ENAM0042.
Goulpeau, Jacques (2006) DNA microarrays Integration in a Microfluidic Device. PhD thesis Physique et chimie des matériaux, ESPCI p.203.
Graff, Stéphanie (2006) Viscoplastic behavior of zirconium alloys in the temperatures range 20°C-400°C : characterization and modeling of strain ageing phenomena. PhD thesis Sciences et Génie des Matériaux, ENSMP - Centre des Matériaux P.M. Fourt, ENSMP p.319.
Habak, Malek (2006) A study of the influence of the microstructure and cutting parameters on the material behaviour of bearing steel 100Cr6 in hard turning. PhD thesis Mécanique, Matériaux, Procédés, ENSAM 2006ENAM0057.
Hassen, Ghazi (2006) Modélisation multiphasique pour le calcul des ouvrages renforcés par inclusions rigides. PhD thesis, ENPC.
Haÿne Lecocq, Bénédicte (2006) Study of acoustic comportment of cavitary materials. PhD thesis Acoustique, ENSAM 2006ENAM0050.
Hehn, Olivier (2006) Analyse expérimentale et simulation thermomécanique du soudage bout à bout de tubes de polyéthylène. PhD thesis Sciences et Génie des Matériaux, ENSMP - CEMEF Centre de Mise en Forme des Matériaux, ENSMP.
Heripre, Eva (2006) Multiscale coupling between polycristalline numerical simulations and strain field measurements for the identification of the parameters of the constitutive law and fracture properties. PhD thesis LMS, EP - LMS Laboratoire de Mécanique des Solides, EP/X p.223.
Hostache, Renaud (2006) Satellite image analysis for three-dimensionnal flood hazard characterisation and hydraulic modelling support. PhD thesis Sciences de l'eau, ENGREF.
Idiart, Martin (2006) Macroscopic behavior and field fluctuations in non linear composite materials. PhD thesis LMS, EP - LMS Laboratoire de Mécanique des Solides, EP/X p.270.
Jabbado, Mohamad (2006) High-cycle fatigue of metallic structures: life time under variable loadings. PhD thesis LMS, EP - LMS Laboratoire de Mécanique des Solides, EP/X p.148.
Jülich Saavedra, Amelia Saskia (2006) Shape control of a Fibre reinforced Polymer Bridge. PhD thesis, ENPC p.258.
Kaouache, Belkhiri (2006) Multiscales analysis of stress induced martensitic transformation in the shape memory alloys: microstructure-stresses correlation. PhD thesis Mécanique et Matériaux, ENSAM 2006ENAM0034.
Khelidj, Nadjet (2006) Ageing of cable insulators made of polyethylene in nuclear environment. PhD thesis Mécanique et matériaux, ENSAM 2006ENAM0033.
Kogevnikov, Ivan (2006) Modelling mechanical system with an infinite number of degrees of freedom - Application to the tyre dynamics. PhD thesis, ENPC.
Labidi, Chafik (2006) Improvement of wood machining tools' service life by surface treatments and cutting edges's modifications. PhD thesis Mécanique et matériaux, ENSAM 2006ENAM0058 p.184.
Lafon-Jalby, Yoann (2006) Finite element simulation of various strategies for scoliosis surgical correction. PhD thesis Biomécanique, ENSAM 2006ENAM0061.
Lange, Christian (2006) Experimental study and numerical simulation of the hemming process of automotive parts. PhD thesis Sciences et Génie des Matériaux, ENSMP - CEMEF Centre de Mise en Forme des Matériaux, ENSMP.
Le Clerc, Christophe (2006) Mécanismes microstructuraux impliqués dans la fatigue des fibres thermoplastiques. PhD thesis Sciences et Génie des Matériaux, ENSMP - Centre des Matériaux P.M. Fourt, ENSMP p.233.
Leclaire, Benjamin (2006) Theoretical and Experimental Study of a rotating flow in a duct. PhD thesis ONERA/DAFE, ONERA/DAFE, EP/X p.194.
Lemaitre, Cécile (2006) Dynamics of a rainwater film around a cable subject to wind. PhD thesis LADX, LADX, EP/X p.172.
Lertwimolnun, Wiboon (2006) Realisation of polypropylene/organoclay nanocomposites using twin screw extrusion. PhD thesis Sciences et Génie des Matériaux, ENSMP - CEMEF Centre de Mise en Forme des Matériaux, ENSMP.
Lesshafft, Lutz (2006) Nonlinear global modes and sound generation in hot jets. PhD thesis LADX, EP - LADX, EP/X p.0.
Levrau, Carole (2006) Understanding and modelling of lubrication mechanisms during stainless steel wire-drawing with dry soaps. PhD thesis Sciences et Génie des Matériaux, ENSMP - CEMEF Centre de Mise en Forme des Matériaux, ENSMP.
Lopez-pamies, Oscar (2006) On the effective behavior, microstructure evolution and macroscopic stability of elastomeric composites. PhD thesis LMS, EP - LMS Laboratoire de Mécanique des Solides, EP/X p.227.
Luu, Thanh Trung (2006) Déchirure ductile des aciers à haute résistance pour gazoducs (X100). PhD thesis Sciences et Génie des Matériaux, ENSMP - Centre des Matériaux P.M. Fourt, ENSMP.
Madi, Kamel (2006) Influence de la morphologie tridimensionnelle des phases sur le comportement mécanique de réfractaires électrofondus. PhD thesis Sciences et génie des matériaux, ENSMP - Centre des Matériaux P.M. Fourt, ENSMP.
Mai, Hai Dang (2006) The opartional application of dynamic traffic assignment models and the convergence of equilibrium algorithms. PhD thesis, ENPC.
Maiolino, Siegfried (2006) Fonction de charge générale en géomécanique: application aux travaux souterrains. PhD thesis LMS, EP - LMS Laboratoire de Mécanique des Solides, EP/X p.0.
Maquin, François (2006) Experimental methodology for the study of the thermomechanical behaviour of materials under cyclic loading. PhD thesis Mécanique et Matériaux, ENSAM 2006ENAM0045.
Marchal, Nicolas (2006) Propagation de fissure en fatigue-fluage à haute température de superalliages monocristallins à base de nickel. PhD thesis Sciences et génie des matériaux, ENSMP - Centre des Matériaux P.M. Fourt, ENSMP.
Martin, Lionel (2006) Development of integrated design tool and methodology for the foundry industry. PhD thesis Génie mécanique, ENSAM 2006ENAM0062.
Martin, Patrick (2006) Etude du comportement des poutres lamellées clouées boulonnées en flexion. PhD thesis Sciences forestières et du bois, Ecole Nationale du Génie Rural, des Eaux et Forêts, ENGREF 06ENGR0011 p.140.
Mathieu, Jean-Philippe (2006) Micromechanical analysis and modelling of the behavior and brittle fracture of a french 16MND5 steel: role of microstructural heterogeneities. PhD thesis Mécanique et Matériaux, ENSAM 2006ENAM0037.
Mercier, Julien (2006) Prise en compte du vieillissement et de l’endommagement dans le dimensionnement de structures en matériaux composites. PhD thesis Sciences et génie des matériaux, ENSMP - Centre des Matériaux P.M. Fourt, ENSMP p.246.
Micouin, Patrice (2006) Proposals for the definition and the implementation of systems engineering processes : application int the case of the concurrent desing in the area of car industry. PhD thesis Génie Industriel, ENSAM 2006ENAM0028 p.178.
Moreaud, Maxime (2006) Propriétés morphologiques multi-échelles et prévision du comportement diélectrique de nanocomposites. PhD thesis Morphologie Mathématique, CMM Centre de Morphologie Mathématique, ENSMP p.208.
Nguyen, Dang-Truc (2006) Prediction of permanent deformations of surface layers of bituminous pavements. PhD thesis, ENPC.
Pannier, Yannick (2006) Identification of elasto-plastic parameters from statically-undetermined tests : experimental application and validation of the virtual field method. PhD thesis Mécanique, ENSAM 2006ENAM0026.
Peng, Jun (2006) Determination of residual stresses in coating by pseudo-grazing incidence X-Ray diffraction method. PhD thesis Génie mécanique et matériaux, ENSAM 2006ENAM0019.
Pham, Quoc Thai (2006) Study of damage and fracture of argillacears rocks submihed to hydromechanical loadings. PhD thesis LMS, EP - LMS Laboratoire de Mécanique des Solides, EP/X p.190.
Ricci, Laurent (2006) Discrete and continuous railway track models. PhD thesis, ENPC p.183.
Richaud, Emmanuel (2006) Durabilité des Géotextiles en Polypropylène. PhD thesis Mécanique et Matériaux, ENSAM 2006ENAM0035.
Rossi, Frédéric (2006) Study and understanding of the ageing mechanisms in lead-calcium alloys. PhD thesis Sciences et génie des matériaux, ENSAM 2006ENAM0070 p.206.
Ruyer, Pierre (2006) A phase field model for the study of boiling flows. PhD thesis LMS, EP - LMS Laboratoire de Mécanique des Solides, EP/X p.340.
Temimi-maaref, Nadia (2006) The mechanical behaviour of unfilled and filled polypropylenes. Experimental and numerical approaches. PhD thesis Sciences et Génie des Matériaux, CEMEF - Centre de Mise en Forme des Matériaux, ENSMP p.174.
Trabelsi, Walid (2006) Ageing of a carbon/epoxy composite for aeronautic applications. PhD thesis Mécanique et Matériaux, ENSAM 2006ENAM0064.
Varona, Cyrille (2006) Recherche, croissance cristalline et caractérisation de nouveaux matériaux pour microlasers bleu et infrarouge. PhD thesis, ENSCP.
Vervoort, Sylvie (2006) Behaviour of hydrogels swollen in polymer solutions under mechanical action. PhD thesis Sciences et Génie des Matériaux, ENSMP - CEMEF Centre de Mise en Forme des Matériaux, ENSMP.
Zaki, Wael (2006) A unified thermomechanical model for shape memory materials. Application to cyclic loading and fatigue. PhD thesis Mécanique , ENSTA / UME - Laboratoire de Mécanique, EP/X p.187.
Zhang, Yi (2006) Analysis and design of protective structures against rock falls. PhD thesis, ENPC.
2005
Al shaer, Ali (2005) Permanent settlement analysis of ballasted railway tracks - Dynamical approach. PhD thesis, ENPC.
Asserin-Lebert, Alexandra (2005) Etude expérimentale et prévision des mécanismes de rupture des tôles et des joints soudés bout à bout en alliage d'aluminium 6056. PhD thesis Sciences et génie des matériaux, ENSMP - Centre des Matériaux P.M. Fourt, ENSMP.
Bahloul, Riadh (2005) Optimisation of the bending process of high strength low alloy sheet mtetal. PhD thesis Génie mécanique et matériaux, ENSAM 2005ENAM0031.
Barthelemy, Jean-François (2005) Approche micromécanique de la rupture et de la fissuration dans les géomatériaux. PhD thesis, ENPC.
Béarée, Richard (2005) Toward the integration of vibratory phenomena int he command generation of high-dynamics machine-tools. PhD thesis Automatique, ENSAM 2005ENAM0030.
Ben tahar, Mehdi (2005) Contribution a l'étude et la simulation du procédé l'hydroformage. PhD thesis Mécanique Numérique, ENSMP - CEMEF Centre de Mise en Forme des Matériaux, ENSMP.
Benitez-eslava, Edgardo (2005) Reforming the service of water: History, technical system and firms'regulation. The case of the Federal District of Mexico (1992-2003). PhD thesis, ENPC.
Bertrand, Samuel (2005) In vivo 3D geometrical modeling of the human trunk unsing EOS X-Ray system. PhD thesis Biomécanique, ENSAM 2005ENAM0020.
Berviller, Laurent (2005) Integrated design and manufacturing of "net shape" forged products: application on forged differentials. PhD thesis Mécanique, ENSAM 2005ENAM0005.
Bethmont, Sandrine (2005) Self-compacting concretes segregation mechanisms - Experimental study of granular interactions. PhD thesis, ENPC.
Bissey, Stéphanie (2005) Development of a cutting forces model applicable to a family of tools: case of milling of hard steels. PhD thesis Procédés de fabrication, ENSAM CER Cluny, ENSAM 2005ENAM0004.
Blanc, Monique (2005) Constrained discret layer model for the computation of thick multilayered composites. PhD thesis Mécanique, ENSAM 2005ENAM0007.
Blassiau, Sébastien (2005) Modélisation des phénomènes microstructuraux au sein d'un composite unidirectionnel carbone/epoxy et prédiction de durée de vie: contrôle et qualification de réservoirs bobinés. PhD thesis Sciences et génie des matériaux, ENSMP - Centre des Matériaux P.M. Fourt, ENSMP.
Bonhomme, Alexandre (2005) Comportement à l'usure de pastilles de contacts électriques à matrice argent. PhD thesis Sciences et génie des matériaux, ENSMP - Centre des Matériaux P.M. Fourt, ENSMP.
Bonnet, Bénédicte (2005) Comportement au choc de matériaux composites pour applications automobiles. PhD thesis Sciences et génie des matériaux, ENSMP - Centre des Matériaux P.M. Fourt, ENSMP.
Boronski, Piotr (2005) A method based on poloidal-toroidal potentials applied to the von Kármán flow in a finite cylinder geometry. PhD thesis LIMSI-CNRS, LIMSI-CNRS, EP/X p.199.
Bourdeau, Céline (2005) Numerical modelling of site effects and landslides in seismic areas. PhD thesis Géologie de l'ingénieur, ENSMP.
Boussetta, Ramzy (2005) Estimateurs d'erreur et ramaillage adaptatif: application à la simulation 3D des procédés de mise en forme des matériaux. PhD thesis Mécanique Numérique, ENSMP - CEMEF Centre de Mise en Forme des Matériaux, ENSMP.
Cacho, Florian (2005) Etude et simulation de la siliciuration du nickel: application dans les technologies MOS. PhD thesis Sciences et génie des matériaux, ENSMP - Centre des Matériaux P.M. Fourt, ENSMP.
Carin, Aurélien (2005) Etude expérimentale et modélisation thermomécanique de l'étape de calibration dans le procédé d'extrusion de tubes en polyamide 12. PhD thesis Sciences et Génie des Matériaux, ENSMP - CEMEF Centre de Mise en Forme des Matériaux, ENSMP.
Cohen Assouline, Stéphanie (2005) Numerical simulation of machining at macroscopic scale: taking into account the workpiece deformations. PhD thesis Mécanique, ENSAM 2005ENAM0028.
Doppler, Delphine (2005) Stability and dynamics of submarine granular slopes. PhD thesis Mécanique Physique, ENSTA.
Dridi, Wissem (2005) Coupling between corrosion and biphasic transport in porous media: Application to the evolution of radioactive wastes disposal. PhD thesis, ENPC.
Erner, Aliza (2005) Etude expérimentale du thermoformage assisté par poinçon d'un mélange de polystyrènes. PhD thesis Sciences et Génie des Matériaux, ENSMP - CEMEF Centre de Mise en Forme des Matériaux, ENSMP.
Florence, Céline (2005) Experimantal study of reflective cracking and overall ultimate yield strengh model of periodic lattices. PhD thesis, ENPC.
Gaudichet-Maurin, Emmanuelle (2005) Characterisation and ageing of a water ultrafiltration membrane. PhD thesis Mécanique et Matériaux, ENSAM 2005ENAM0019.
Gibert, Fabien (2005) 2 microns Heterodyne Doppler and Differential Absorption Lidar measurements of Atmospheric CO2 Density. PhD thesis LMD, EP - LMD, EP/X p.0.
Gouttebroze, Sylvain (2005) Modélisation 3d par éléments finis de la macroségrégation lors de la solidification d'alliages binaires. PhD thesis Sciences et Génie des Matériaux, ENSMP - CEMEF Centre de Mise en Forme des Matériaux, ENSMP.
Hamza, Rose (2005) Selfhealing of teh damaged zone around the tunnel in little permeable rocks. PhD thesis, ENPC p.220.
Hug, Gregor (2005) Behaviour analysis of carbon-epoxy laminates under high-speed loading: manufacture of the same materials by means of microwave curing for comparison. PhD thesis Mécanique et matériaux, ENSAM 2005ENAM0010.
Huynh Kim Long, Alex (2005) Analysis of elastomer's dynamic behaviour: modeling and identification. PhD thesis, ENPC.
Jacob, Xavier (2005) Application of elastic waves interaction to the measurement of nonlinear properties of materials and to high-pressure wave fields characterization. PhD thesis Acoustique Physique, Laboratoire Ondes et Acoustique, ESPCI.
Karaseva, Olga (2005) Déformations élastiques des presses de forgeage et calcul parallèle. PhD thesis Mécanique Numérique, ENSMP - CEMEF Centre de Mise en Forme des Matériaux, ENSMP.
Le thiet, Trung (2005) Study of the process of vibratory driving of cylindrical inclusions in calibration chamber. Application to the piles. PhD thesis, ENPC.
Liu, Weitao (2005) Finite Element Modelling of Macrosegregation and Thermomechanical Phenomena in Solidification Processes. PhD thesis Mécanique Numérique, ENSMP - CEMEF Centre de Mise en Forme des Matériaux, ENSMP.
Lorrain, Jean-Paul (2005) Ductility criterion based on ellipticity loss of the elastic-plastic tangent modulus deduced from a self consistent model. PhD thesis Mécanique et matériaux, ENSAM 2005ENAM0002.
Louvet, Nicolas (2005) Achieving productive public debate in local policy making: the case of the French local transport plans.</