- Paristech (2254)
- Arts et Métiers ParisTech (ENSAM) (253)
Number of items: 253.
2010
Du, Xi (2010) High order residual based scheme for numerical simulation of compressible flows on unstructured grids. PhD thesis Mécanique, DynFluid, ENSAM 2010ENAM0003 p.156.
Goslin, Fabien (2010) Depth-controlled rendering of stereoscopic video images for virtual reality applications. PhD thesis Informatique, ENSAM 2010ENAM0001 p.139.
Sandoz, Baptiste (2010) Contribution to the geometric and mechanical modeling of the child trunk. PhD thesis Biomécanique, Laboratoire de Biomécanique, ENSAM 2010ENAM0004 p.133.
2009
Aladad, Hasan (2009) Manufacture systems design of mechanical work piece in mass production: formalization of the geometrical (envelope) and kinematic configuration of reconfigurable machine tool (rmt. PhD thesis, Laboratoire de Conception Fabrication Commande (LCFC), Arts et Métiers ParisTech, centre de Metz, ENSAM 2008ENAM0012 p.207.
Azarian, Armin (2009) A new modular framework for automatic diagnosis of fault, symptoms and causes applied to the automotive industry. PhD thesis Automatique et traitement du signal, Laboratoire de Conception, Fabrication et Commande (LCFC), ENSAM 2009ENAM0029 p.278.
Belhadj, Asma (2009) Experimental and numerical contribution laser welding study: application to magnesium alloys. PhD thesis Mécanique et Matériaux, Mécasurf / MA2I, ENSAM 2009ENAM0001 p.151.
Bierla, Aleksandra (2009) Machining of high strength steel with straight cutting oils - physico-chemical effects of sulphur. PhD thesis Génie mécanique, procédés de fabrication, Laboratoire Bourguignon des Matériaux et Procédés, ENSAM 2009ENAM0022 p.204.
Bonnet, Xavier (2009) Expérimental and numerical modelisation of prosthetic components for lower limb amputee. PhD thesis Biomécanique, LBM, ENSAM ENAM0038 p.176.
Bruyere, Antoine (2009) Modelling and control of a 7-phase starter-alternator for an automotive micro-hybrid application. PhD thesis Génie Electrique, Laboratoire d'Electrotechnique et d'Electronique de Puissance de Lille, ENSAM 2009ENAM0006 p.160.
Campos amezcua, Rafael (2009) Analysis of stationary and non-stationary cavitating flow in turbomachines. PhD thesis Mécanique, Laboratoire d'Energétique et Mécanique des FLuides Interne, ENSAM 2009ENAM0017 p.236.
Chaves-jacob, Julien (2009) Development of a methodology for reduction in geometrical errors: application on a 5-axis machining of turbomachine components. PhD thesis Génie Mécanique – Procédés de Fabrication, Laboratoire Bourguignon des Matériaux et Procédés, ENSAM 2009ENAM0026 p.182.
Daoud, Wassim (2009) Development of an integrated management system for the ecodesign of medium voltage equipments. PhD thesis Génie industriel, MAPIE, ENSAM 2009ENAM0002 p.231.
Demersseman, Richard (2009) Characterization and causal modelling of a magnetorheological fluid brake for control purpose. PhD thesis Génie Electrique, Laboratoire d'Electrotechnique et d'Electronique de Puissance (L2EP) de Lille, ENSAM 2009ENAM0021 p.192.
Dobrev, Ivan (2009) Actuator surface hybrid model for aerodynamic analysis of flow trough wind turbine rotor with rigid or flexible blades. PhD thesis, SINUMEF, ENSAM 2009ENAM0034 p.135.
El haouzali, Hafida (2009) Peeling of poplar: cultivar and forest station effects on veneer-based products quality. PhD thesis Procédés de fabrication, LABOMAP, ENSAM 2009ENAM0025 p.210.
Garnier, Jérôme (2009) Deposition of transparent conductive oxides thin films by infraredassisted spray CVD for photovoltaic purposes. PhD thesis Energétique, génie des procédés, Laboratoire des arts et métiers ParisTech CER d' Anger, ENSAM 2009ENAM0030 p.196.
Hrimech, Hamid (2009) Evaluation of interaction metaphors for collaborative work distant immersive sites. PhD thesis Informatique, Le2i, ENSAM 2009ENAM0027 p.200.
Issa, Abir (2009) Etudes hydrauliques de l'influence des géométries des bassins sur l'alimentation de pompes. PhD thesis Mécanique des fluides, Laboratoire de Mécanique de Lille, ENSAM 2009ENAM0036 p.174.
Jarrah, Adil (2009) Développement de méthodes statistiques et probabilistes en corrosion par piqûres pour l’estimation de la profondeur maximale : application à l’aluminium A5. PhD thesis, Laboratoire de Métallurgie Physique et Génie des Matériaux, ENSAM 2009ENAM0024 p.146.
Jegou, Sébastien (2009) Dependence of residual stresses of nitride steels on alloying elements. PhD thesis Mécanique-Matériaux, Laboratoire MécaSurf, ENSAM 2009ENAM0032 p.167.
Kremer, Arnaud (2009) Study of the structural choice of cutting tools coated with diamond or polycrystalline solid for competitive and environmental machining of metal matrix composites with ceramic particle reinforcement (CMMp Al / SiC). PhD thesis Procédés de fabrication, LMPF Arts et Metiers Paristech, ENSAM 2009ENAM0009 p.139.
Lansade, Céline (2009) 3D analysis of the kinematic of asymptomatic and pathological cervical spine in vivo. PhD thesis Mécanique, Laboratoire de Biomécanique, ENSAM 2009ENAM0014 p.168.
Lasri, Larbi (2009) Modélisation macromécanique et micromécanique de l'usinage des composites à matrice polymère et fibres longues. PhD thesis Procédés de Fabrication, Laboratoire de mécanique et procédés de fabrication (LMPF), ENSAM 2009ENAM0031 p.158.
Leroy, Yann (2009) Development of a methodology to reliable environmental decisions from life cycle assessment based on analysis and management of uncertainty on inventory data. PhD thesis Génie Industriel, Laboratoire de Modélisation, Analyse et Prévention des Impacts Environnementaux, ENSAM ENAM0033 p.194.
Merle, Xavier (2009) High order finite-difference scheme for the resolution of the global linear stability equations in incompressible and compressible flows. PhD thesis Mécanique, SINUMEF, ENSAM 2009ENAM0016 p.215.
Nicolas, Cyril (2009) Development of a method to qualify distortions of heat treated products. experimental and numerical approaches. PhD thesis Génie Mécanique - Procédés de Fabrication, Laboratoire de Conception Fabrication Commande (anciennement LGIPM), ENSAM 2009ENAM0019 p.273.
Nouri, Hedi (2009) Modeling and identification of a new fatigue damage model for injection-molded short glass fibre reinforced thermoplastics. PhD thesis Mécanique-matériaux (AM), Laboratoire de Physique et Mécanique des Matériaux, ENSAM 2009ENAM0015 p.180.
Panchetti, Minica (2009) Towards using images for polyhedrons simplification and deformation. PhD thesis Conception, Laboratoire des Sciences de l'Information et des Systèmes, ENSAM 2009ENAM0004 p.175.
Robert, Camille (2009) Contribution to the numerical simulation of sheet metal forming proceses - application to incremental sheet forming and superplastic forming. PhD thesis Génie Mécanique - procédés de fabrication, Arts et Métiers ParisTech centre d'Angers, ENSAM 2009ENAM0028 p.160.
Salazar garcia, Mahuampy (2009) Computer-aided-tool for the design of high speed hexapod hydraulic robot. PhD thesis Mécanique, LAboratoire Matériaux Endommagement Fiabilité et Ingénierie des Procédés - LAMEFIP, ENSAM 2009ENAM0010 p.255.
Sarrabi, Salah (2009) Towards an mechanistic approach of polypropylene thermal ageing at a molten state during rotational moulding. PhD thesis Mécanique et Matériaux, Laboratoire d'Ingénierie des Matériaux, ENSAM 2009ENAM0003 p.190.
Secrieru, Claudia (2009) Applications of the fractal analysis in the case of dynamical fractures. PhD thesis Mécanique et matériaux, Ecole Nationale Supérieur d'Arts et Métiers 2009ENAM0023 p.254.
Shamsborhan, Hiva (2009) Development of a measurement method of the speed of sound in two-phase flows applying to cavitating flows. PhD thesis Mécanique, LML, Arts et Métiers Paristech, Lille, ENSAM 2009ENAM0005 p.103.
Tea, Céline (2009) The integration of subjective data in the information system for risk management the case of safety in railway transport. PhD thesis Science de gestion, Groupe de Recherche sur le Risque, l'Information et la Décision, ENSAM 2009ENAM0013 p.270.
Trinh, Vuong-dieu (2009) Development and validation of finite elements of type solid-shells reduced integration stablizied usable for non linears cinematic and behavior problems. PhD thesis Mécaniques, LPMM, ENSAM 2009ENAM0008 p.146.
Zaki, Mazen (2009) Numerical Simulation of Blind Holes Drilling by Abrasive WaterJet. PhD thesis Mécanique, SINUMEF, ENSAM 2009ENAM0018 p.128.
Zimmer, Sandra (2009) Contribution to the industrialization of friction stir welding. PhD thesis Génie Mécanique - Procédé de Fabrication, LCFC Laboratoire de Conception Fabrication Commande, ENSAM 2009ENAM0035 p.256.
2008
Al-Ahmad, Mohamad (2008) Advance machining process : contribution to the understanding of plunge or vertical milling operation-analytical and experimental approaches. PhD thesis Génie mécanique, ENSAM 2008ENAM0008 p.167.
Assi, Ayman (2008) Biomechanical analysis of lower limbs for children with cerebral palsy. PhD thesis Biomécanique, Laboratoire de Biomécanique CNRS UMR 8005, ENSAM 2008ENAM0007 p.167.
Atmani, Hakim (2008) Virtual system for an aided shoulder surgery. PhD thesis Informatique, Le2i, ENSAM 2008ENAM0002 p.170.
Ballere, Ludovic (2008) Damage tolerance of impacted curve composite structures : scale effects. PhD thesis Mécanique, LAMEFIP, ENSAM 2008ENAM0010 p.209.
Becker, Eric (2008) Experimental and numerical investigations for the key parameters identification of the steel thixoforging of a part. PhD thesis Mécanique et Matériaux, Laboratoire de Génie industriel et P¨roduction Mécanique équipe IFab, ENSAM 2008ENAM0038 p.300.
Bouix, Rémy (2008) Mechanical behaviour and numerical simulation of behaviour of polymeric foams under static and dynamic loading. PhD thesis Mécanique, LAMFIP, ENSAM 2008ENAM0011 p.171.
Breban, Stefan (2008) Study of electromechanical energy conversion system of a small hydropower plant with variable speed. PhD thesis Génie Electrique, Laboratoire d’Electrotechnique et d’Electronique de Puissance (L2EP) de Lille, ENSAM 2008ENAM0033 p.184.
Brosset, David (2008) Route description in natural environment : an integrated model for verbal description and spatial representation in GIS. PhD thesis Informatique et traitement du signal, Laboratoire de mécanique des systèmes et des procédés, ENSAM 2008ENAM0028 p.148.
Cabelguen, Jean-Charles (2008) Développement d’outils pour l’analyse et la quantification des interactions utilisateur-fauteuil-environnement lors de déplacements en fauteuil roulant manuel. PhD thesis Biomécanique, Laboratoire de BioMécanique, ENSAM 2008ENAM0048 p.144.
Collette, Floraine (2008) Vieillissement hygrothermique du Nafion. PhD thesis Mécanique et matériaux, Laboratoire d'ingénierie des matériaux, ENSAM 2008ENAM0029 p.171.
Commin, Loreleï (2008) Joining hot-rolled magnesium alloys using friction stir welding and laser beam welding : experimental approach for mechanical properties understanding. PhD thesis Mécanique et matériaux, MécaSurf, ENSAM 2008ENAM0025 p.163.
Courtecuisse, Vincent (2008) Supervision to a multisource power plant includingwind generator and energy storage connect to network. PhD thesis Génie électrique, L2EP, ENSAM 2008ENAM0027 p.296.
Duplaa, Sébastien (2008) Experimental study of cavitating centrifugal pump during fast start-up. PhD thesis Mécanique, Laboratoire de mécanique de Lille, ENSAM 2008ENAM0040 p.193.
Durier, Anne-Lise (2008) Contribution to the study of the stress-diffusion interaction in polymers. PhD thesis Mécanique et matériaux, Laboratoire d'Ingénierie des Matériaux, ENSAM 2008ENAM0003 p.148.
Franz, Gérald (2008) Prediction of the formability limit of multiphase steels using a micromechanical approach. PhD thesis Mécanique et matériaux, Laboratoire de physique et mécanique des matériaux, ENSAM 2008ENAM0022 p.170.
Gaignaire, Roman (2008) Contribution to the numerical modelisation of static and stochastic electromagnetism. PhD thesis Génie électrique, L2EP, ENSAM 2008ENAM0005 p.189.
Gildemyn, Eric (2008) Caractérisation des procédés de fabrication de pièces de securité automobile. optimisation multiobjectifs de la mise en forme. PhD thesis Mécanique - Matériaux, Laboratoire Procédés Matériaux Instrumentation - ERT 1055 "ENDOFORM", ENSAM 2008ENSAM0019 p.153.
Gomand, Julien (2008) Analysis of parallel multi-actuated systems using causal ordering methods. Application to motion control of a dual-drive high speed positionning gantry stage. PhD thesis Génie Electrique, Laboratoire d'Electrotechnique et d'Electronique de Puissance (L2EP) de Lille, ENSAM 2008ENAM0043 p.151.
Humbert, Ludovic (2008) Semi-automation of the skeleton x-rays processing for geometric model and clinical analysis. PhD thesis Biomécanique, Laboratoire de Biomécanique, Paris, France, ENSAM 2008ENAM0023 p.204.
Ibanez-Pascual, Stéphanie (2008) Conception d'un modèle équilibré de performance : des leviers innovants en matière de management des hommes. PhD thesis Génie industriel, Laboratoire CPI, ENSAM 2008ENAM006 p.291.
Iliescu, Daniel (2008) Experimental and numerical approaches of machining of dry carbon/epoxy composites. PhD thesis MECANIQUE, LAMEFIP, ENSAM 2008ENAM0045 p.219.
Illoul, Amran Lounès (2008) Implementation of the constrained natural element method in 3D : application to the simulation of adiabetic shearing. PhD thesis Mécanique, Laboratoire de mécanique des systèmes et des procédés, ENSAM 2008ENAM0015 p.124.
Kim, Jin-Hwan (2008) Identification of the local stiffness reduction of damaged composite plates using the virtual fields method. PhD thesis Mécanique, Mécanique et procédés de fabrication CER de Châlon-en-Champagne, ENSAM 2008ENAM0026 p.169.
Laine, Bertrand (2008) Influence of fibrous reinforcement's deformations on its permeability : modelisations and experiments. PhD thesis Génie mécanique - procédés de fabrication, LAMCOS/ONERA-DMSC, ENSAM 2008ENAM0035 p.146.
Le Garrec, Thomas (2008) Direct computation of airfoil trailing edge noise with a multi-domain approach. PhD thesis Mécanique, SINUMEF, ENSAM 2008ENAM0021 p.208.
Lemarchand, François (2008) Study of residual stress appearance in the process of on-line consolidation of thermoplastic composites. PhD thesis Mécanique, Laboratoire de mécanique des systèmes et des procédés (LMSP), ENSAM 2008ENAM0034 p.248.
Luna Sanchez, David (2008) Modelling and preliminary design of the solar dryer to wood pine whit energy storage. PhD thesis Conception, TREFLE, ENSAM 2008ENAM0017 p.179.
Malard, Benoit (2008) Caractérisation multiéchelle par diffraction de neutrons et rayonnement synchrotron de la transformation martensitique sous contrainte dans un alliage à mémoire de forme CuAlBe. PhD thesis Mécanique et Matériaux, Laboratoire de Physique et Mécanique des Matériaux, ENSAM N° 2008ENAM0044 p.196.
Marcelet, Meryem (2008) Shape optimization of a fluid-structure system. PhD thesis Mécanique, Département de Simulation Numérique pour la Mécanique des FLuides, ENSAM 2008ENAM0039 p.202.
Marcovschi Champain, Sabina (2008) Correlations entre les parametres biomecaniques du rachis et les indices cliniques pour l’analyse quantitative des pathologies du rachis lombaire et de leur traitement chirurgical. PhD thesis Bio-Mécanique, Laboratoire de Bio-Mécanique, ENSAM CER de Paris, CNRS, ENSAM 2008ENAM0024 p.347.
Merzouki, Tarek (2008) Experimental identification and micromechancial modeling of the behavior of a multicrystal out of shape memory alloy. PhD thesis Mécanique et matériaux, Laboratoire de physique et mécanique des matériaux, ENSAM 2008ENAM0032 p.181.
Mosnier, Thomas (2008) Contribution to spinal implants biomechanical analyisis and evaluation. PhD thesis Biomécanique, Laboratoire de Biomécanique, ENSAM 2008ENAM0046 p.180.
Mougenot, Céline (2008) Towards stimulating creativity in design: A model of informational activities in early phases of product design process. PhD thesis Génie industriel, Laboratoire Conception de Produits et Innovation, LCPI (Design & Innovation Lab), ENSAM 2008ENAM0042 p.193.
Mounif, Eskandar (2008) Epoxy/amine resins for reactive rotational molding (RMM) : rheokinetic study and 2D simulation of the flow. PhD thesis Mécanique et matériaux, Laboratoire d'Ingénierie des Matériaux, ENSAM 2008ENAM0004 p.130.
Nguyen Thi Thu, Huyen (2008) Role of microstructural heterogeneities in multiaxial high cycle fatigue : application to laser assisted machining. PhD thesis Mécanique et matériaux, Laboratoire procédés, matériaux, instrumentations, ENSAM 2008ENAM0018 p.187.
Outahyon, Alex (2008) Influence of machining and storage parameters on douglas-fir wood functional surfaces properties. PhD thesis Génie mécanique – Procédés de fabrication, ENSAM 2008ENAM0041 p.283.
Sallaou, Mohamed (2008) Knowledge taxonomy and exploitation in preminary design : application of wind turbine system. PhD thesis Mécanique, Laboratoire TREFLE, ENSAM 2008ENAM0020 p.203.
Sapin, Emilie (2008) Subject-specific vertebral bone mechanical properties assessment using low-dose x-ray imaging devices : prediction of fracture risk. PhD thesis Biomécanique, Laboratoire de Biomécanique, ENSAM 2008ENAM0036 p.167.
Thibault, Alexandre (2008) Contribution to product : process plan integration, application to forging domain. PhD thesis Génie industriel, Laboratoire de Génie Industriel et de Production Mécanique de Metz, ENSAM 2008ENAM0016 p.174.
Vallet, Christophe (2008) Liquid leakage through a rough contact: application to the internal sealing of valves. PhD thesis Mécanique, TREFLE, ENSAM 2008ENAM0030 p.145.
2007
Alfano, David (2007) Transonic buffet simulation and shape optimisation. PhD thesis Mécanique, ENSAM 2007ENAM0011 p.222.
Alizard, Frédéric (2007) Global linear stability analysis of a flat plate separated flow. PhD thesis Mécanique, SINUMEF, ENSAM 2007ENAM0036 p.174.
Baillon, Aurélien (2007) Disentangling beliefs and attitudes towards uncertainty in individual decision-making. PhD thesis Sciences économiques, GRID, ENSAM 2007ENAM0026 p.281.
Baudoin, Aurélien (2007) Pre and post operative analysis of the hip using 3D reconstructions from biplanar low dose X-rays. PhD thesis Biomécanique, ENSAM 2007ENAM0033 p.177.
Bonnet, Nicolas (2007) Contribution to the experimental and numerical study of submillimetric sheet behavior. PhD thesis Mécanique, ENSAM 2007ENAM0004 p.219.
Chalbaud, Carlos (2007) CO2 interfacial properties : application to multiphase flow at reservoir conditions. PhD thesis Mécanique, ENSAM 2007ENAM0009 p.228.
Chenouard, Raphaël (2007) Constraint satisfaction solving applied to decision support for embodiment design. PhD thesis Informatique - Traitement du signal, ENSAM 2007ENAM0041 p.170.
Coquillat, Marie (2007) Ageing of polybutadiene based propellants : kinetic modelling of oxidation. PhD thesis Mécanique et Matériaux, ENSAM 2007ENAM0021 p.186.
Cyr, Charles (2007) Modeling and characterization of soft magnetic composites used in electrical machines. PhD thesis Génie électrique, Laboratoire d'Électrotechnique et d'Électronique de Puissance, ENSAM 2007ENAM0015 p.206.
Dhiaf, Mohamed Mahjoub (2007) Proposition a model measure of the impact of the total quality management on the global performance : case study of Tunisian textile clothing industry. PhD thesis Génie industriel, ENSAM 2007ENAM0013 p.261.
Douadji, Lyes (2007) Uniform heat treatment of the non metal composites by means of the dielectric effect of attenuation of electromagnetic waves. PhD thesis Energétique et génie des procédés, ENSAM 2007ENAM0006 p.204.
Fedala, Djaafer (2007) Modeling of broadband noise radiated by an airfoil : application to turbomachinery. PhD thesis Mécanique, ENSAM 2007ENAM0034 p.160.
Goubier, Jean-Noël (2007) In vivo kinematics of the trapezometacarpal joint. PhD thesis Biomécanique, ENSAM 2007ENAM0008 p.138.
Guo, Baoqiao (2007) Simultaneous identification of stiffness and damping parameters from full field measurements on isotropic vibrating plates by the virtual fields method. PhD thesis mécanique, ENSAM 2007ENAM0010 p.196.
Haddag, Badis (2007) Contribution to the modelling of sheet metal forming : application to spring-back and localization. PhD thesis Mécanique, ENSAM 2007ENAM0002 p.203.
Harscoet, Erwan (2007) Design of an environmental management accounting system oriented toward value creation : application to a pollution prevention investment. PhD thesis Génie industriel, ENSAM 2007ENAM0022 p.373.
Hennebelle, François (2007) Determination of measurements uncertainties on coordinate measuring machines application to gears. PhD thesis Mécanique et Matériaux, ENSAM 2007ENAM0035 p.275.
Huang, Wenjun (2007) Grain scale stresses and strains determination by X-ray. PhD thesis Génie mécanique et matériaux, ENSAM 2007ENAM0003 p.142.
Jolivet, Erwan (2007) Biomechanical modelisation of hip for hip fracture risk. PhD thesis Biomécanique, ENSAM 2007ENAM0019 p.176.
Joubert de La Motte, Pascal (2007) Characteristic time-step scheme for transonic flows and optimum aeroelastic design of wing with a large aspect ratio. PhD thesis Mécanique, ENSAM 2007ENAM0005.
Jourieh, Munif (2007) Development of a representative model of a wind turbine in order to study the installation of several machines on a wind park. PhD thesis Mécanique, ENSAM 2007ENAM0032 p.149.
Kammoun, Hilda (2007) Parameter-free measurement of the utility function and loss aversion under prospect theory. PhD thesis Sciences économiques, ENSAM 2007ENAM0025 p.255.
Le lan, Jean-Vincent (2007) A study on simplified methods for machining simulation at a macroscopic scale. PhD thesis Mécanique, ENSAM 2007ENAM0045 p.142.
Lecompte, Jennyfer (2007) In vivo head-neck segment biomechanics and air defense neuromuscular and morphological approaches. PhD thesis Biomécanique, Laboratoire de BioMécanique, ENSAM 2007ENAM0044 p.154.
Lopez, Cédric (2007) Optimization methods for helicopter landing gears. PhD thesis Conception, LSIS, ENSAM 2007ENAM0038 p.175.
Mareau, Charles (2007) Micromechanical modeling of self-heating and microplasticity in steels under cyclic loading. PhD thesis Mécanique et Matériaux, Laboratoire de Physique et Mécanique des Matériaux, ENSAM 2007ENAM0037 p.216.
Missoum Benziane, Djamel (2007) A new fully coupled two-scales modelling for mechanical problems involving microstructure : the 95/5 technique. PhD thesis Mécanique, ENSAM 2007ENAM0007 p.127.
Moulart, Raphaël (2007) Development and implementation of a full-field strain measurement method at the micrometric scale. PhD thesis Mécanique, ENSAM 2007ENAM0031 p.160.
Noyon, Valérie (2007) A relative and spatio-temporal model of geographic trajectories. PhD thesis Informatique, IRENav, Ecole navale, ENSAM 2007ENAM0023 p.218.
Remy, Ghislain (2007) Optimal control of a linear synchronous motor for a high speed positionning actuator. PhD thesis Génie Electrique, Laboratoire d'Electrotechnnique et d'Electronique de Puissance de Lille, ENSAM 2007ENAM0042 p.188.
Rousseau, Marc-Antoine (2007) Cervical disc arthroplasty : evaluation methods and biomechanical analysis. PhD thesis Biomécanique, ENSAM 2007ENAM0020 p.96.
Singland, Jean-Dominique (2007) Mechanical and clinical evaluation of home made abdominal aortic endograft. PhD thesis Biomécanique, ENSAM 2007ENAM0012 p.132.
Südhoff, Ingrid (2007) Geometrical and mechanical patient specific modeling of the locomotor system. PhD thesis Biomécanique, ENSAM 2007ENAM0029 p.258.
Sura, Edoardo (2007) Tribo-energetic analysis of belt grinding of hardened steel and spheroidal graphite cast iron journals. PhD thesis Procédés de fabrication, ENSAM 2007ENAM0043 p.158.
Triconnet, Karen (2007) Mechanical properties identification from full-filled measurement in a multi-phase material. PhD thesis Mécanique, ENSAM 2007ENAM0014 p.222.
Verhille, Jean-Noël (2007) Energetique Macroscopique Representation of subway VAL 206 and deduced inversion based control. PhD thesis Automatique, ENSAM 2007ENAM0018 p.254.
Wronski, Sebastian (2007) Examination of residual stresses in heterogeneous textured materials using diffraction and deformation models. PhD thesis Mécanique et Matériaux, Université de sciences et technologie AGH de Cracovie, ENSAM 2007ENAM0017 p.160.
Xavier, José (2007) Characterisation of the wood stiffness variability within the stem by the virtual fields method : application to P.pinaster in the LR plane. PhD thesis Mécanique, ENSAM 2007ENAM0030 p.151.
Younsi, Mohand (2007) Numerical and experimental unsteady flow and aeroacoustic behavior of forward centrifugal fans. PhD thesis Mécanique, ENSAM 2007ENAM0027 p.156.
2006
Abouzahir, Omar (2006) Conception of a tool for measure and reduction of the quality costs: case of the piloting of industrial processes. PhD thesis Génie industriel, ENSAM 2006ENAM0059.
Arbaoui, Abdelaziz (2006) Decision support for the definition of wind turbine systems : adequacy to site specificities and weak electrical networks. PhD thesis Mécanique, ENSAM 2006ENAM0027 p.133.
Bastard, Myriam (2006) Durability thermoplastic pieces: application to polyoxymethylene. PhD thesis Mécanique et Matériaux, ENSAM 2006ENAM0003.
Baudouin, Cyrille (2006) Contribution to the qualification of a manufacturing process by a dimensional approach : application to "net shape" formed bevel gears. PhD thesis Génie mécanique, ENSAM 2006ENAM0048.
Benabes, Jérôme (2006) Non local energy fatigue life calculation approach of structures in multiaxial fatigue under variable amplitude loadings : application to a railway wheel. PhD thesis Mécanique, ENSAM 2006ENAM0069 p.231.
Berrahmoune, Mohamed Reda (2006) Martensitic transformation and delayed cracking phenomenon in the 301LN unstable austenitic steel. PhD thesis Mécanique et Matériaux, ENSAM, ENSAM 2006ENAM0041 p.186.
Bonin, Vincent (2006) Analytical modelling of chip formation during beech green wood rotary veneer cutting process. PhD thesis Mécanique, ENSAM 2006ENAM0022.
Boutrouft, Keltoum (2006) Rayleigh-Taylor like thermal instabilities in supercritical fluids. PhD thesis Mécanique, ENSAM 2006ENAM0067.
Bruyère, Jérôme (2006) Bevel gear design: anlaysis and synthesis of geometry and tolerances. PhD thesis Mécanique et génie mécanique, ENSAM 2006ENAM40.
Caceres Salazar, Gustavo Ernesto (2006) Modeling of drying for a saturated deformable porous media: taking into account the liquid pressure. PhD thesis Mécanique, ENSAM 2006ENAM0012.
Charpail, Estelle (2006) Mechanical behavior analysis of human ribs in dynamics. PhD thesis Mécanique, ENSAM 2006ENAM0036 p.300.
Chevalot, Nicolas (2006) Analysis and simulation of in seated human prehensible and reaching movements for ergonomic uses. PhD thesis Biomécanique, ENSAM 2006ENAM0066.
Corduan, Nolwenn (2006) Study of vibratory behaviour of thin walled parts in finishing milling operations : application on blades of high pressure aeronautical turbo compressor. PhD thesis Génie mécanique, ENSAM 2006ENAM0011 p.139.
Croston, Tania (2006) Experimental study of short reinforced concrete beam behavior repaired by two fiber reinforced polymer methods through three points bending test (probabilistic approach). PhD thesis Mécanique, ENSAM 2006ENAM0017 p.242.
Dakhlaoui, Rim (2006) Analyze of phase's mechanical behaviour of a multiphase polycristalline alloy by X-ray and neutron diffraction. PhD thesis Mécanique et Matériaux, ENSAM 2006ENAM0044.
De Luca, Livio (2006) Surveying and multi-representation of architectural heritage : definition of an hybrid approach for 3D reconstruction of buildings. PhD thesis Conception, ENSAM 2006ENAM0009 p.217.
De Rouvray, Alexandre (2006) Integrating emotional and sensory preferences in the design of furniture: proposal of an affective engineering method. PhD thesis Génie industriel, ENSAM 2006ENAM0063.
Denaud, Louis Etienne (2006) Vibro-acoustic analysis of the peeling process. PhD thesis Mécanique, ENSAM 2006ENAM0043.
Dieye, Mamadou (2006) Dynamic behavior of the worpiece/tool/machine (WTM) in creep feed grinding process. PhD thesis Génie mécanique, ENSAM 2006ENAM0020 p.151.
Diolez, Gilles (2006) Geometric position control : towards new tools more efficient. PhD thesis Génie mécanique, ENSAM 2006ENAM0029.
Dray Bensahkoun, Delphine (2006) Predictin of the thermoelastic properties of an injection molded short-fiber composite. PhD thesis Mécanique et matériaux, ENSAM 2006ENAM0008.
Duchemin, Laure (2006) Personalized finite element modelling of the proximal femur for fracture risk prediction. PhD thesis Mécanique, ENSAM 2006ENAM0010.
Dumenil-Lefebvre, Anne (2006) Integration of sensory aspects in the design of glass packaging: development of a methodological instrument based on the techniques of sensory assessment. PhD thesis Génie industriel, ENSAM 2006ENAM0006.
Falissard, Fabrice (2006) Vorticity preserving numerical schemes in compressible aerodynamics. PhD thesis Mécanique, ENSAM 2006ENAM0005.
Germain, Guenaël (2006) A contribution towards the optimisation of Laser Assisted Machining. PhD thesis Mécanique, matériaux et procédés, ENSAM 2006ENAM0051.
Gille, Olivier (2006) Tool for evaluating trunk muscles using MRI: application to study of posture and muscular lesions secondary to surgery. PhD thesis Biomécanique, ENSAM 2006ENAM0054.
Goujon, Hélène (2006) Gait analysis of transfemoral amputee. PhD thesis Mécanique, ENSAM 2006ENAM0042.
Habak, Malek (2006) A study of the influence of the microstructure and cutting parameters on the material behaviour of bearing steel 100Cr6 in hard turning. PhD thesis Mécanique, Matériaux, Procédés, ENSAM 2006ENAM0057.
Haoues, Nizar (2006) Contribution to integrate constraints of dismantling and recycling in the first phases of design of products. PhD thesis Génie Industriel, ENSAM 2006ENAM0014.
Haÿne Lecocq, Bénédicte (2006) Study of acoustic comportment of cavitary materials. PhD thesis Acoustique, ENSAM 2006ENAM0050.
Kaouache, Belkhiri (2006) Multiscales analysis of stress induced martensitic transformation in the shape memory alloys: microstructure-stresses correlation. PhD thesis Mécanique et Matériaux, ENSAM 2006ENAM0034.
Khelidj, Nadjet (2006) Ageing of cable insulators made of polyethylene in nuclear environment. PhD thesis Mécanique et matériaux, ENSAM 2006ENAM0033.
Kloczko, Thibaud (2006) A matrix-free implicit treatment for all speed flows on unstructured grids. PhD thesis Mécanique, ENSAM 2006ENAM0007.
Labidi, Chafik (2006) Improvement of wood machining tools' service life by surface treatments and cutting edges's modifications. PhD thesis Mécanique et matériaux, ENSAM 2006ENAM0058 p.184.
Lafon-Jalby, Yoann (2006) Finite element simulation of various strategies for scoliosis surgical correction. PhD thesis Biomécanique, ENSAM 2006ENAM0061.
Lattanzio, Thierry (2006) Characterisation of firms organised in "engineer-to-order". PhD thesis Génie industriel, ENSAM 2006ENAM0039 p.178.
Lattuf, José Antonio (2006) Assistance to piloting innovation process in products design : towards an extended requirements document. PhD thesis Génie industriel, ENSAM 2006ENAM0060 p.208.
Mantelet, Fabrice (2006) Consideration of the emotional perception of the consumers within the design process. PhD thesis Génie industriel, ENSAM 2006ENAM0038.
Maquin, François (2006) Experimental methodology for the study of the thermomechanical behaviour of materials under cyclic loading. PhD thesis Mécanique et Matériaux, ENSAM 2006ENAM0045.
Martin, Lionel (2006) Development of integrated design tool and methodology for the foundry industry. PhD thesis Génie mécanique, ENSAM 2006ENAM0062.
Mathieu, Jean-Philippe (2006) Micromechanical analysis and modelling of the behavior and brittle fracture of a french 16MND5 steel: role of microstructural heterogeneities. PhD thesis Mécanique et Matériaux, ENSAM 2006ENAM0037.
Mejri-Chtioui, Imène (2006) Analysis of non stationnary cavitating flow through inducers. PhD thesis Mécanique, ENSAM 2006ENAM13.
Micouin, Patrice (2006) Proposals for the definition and the implementation of systems engineering processes : application int the case of the concurrent desing in the area of car industry. PhD thesis Génie Industriel, ENSAM 2006ENAM0028 p.178.
Pannier, Yannick (2006) Identification of elasto-plastic parameters from statically-undetermined tests : experimental application and validation of the virtual field method. PhD thesis Mécanique, ENSAM 2006ENAM0026.
Peng, Jun (2006) Determination of residual stresses in coating by pseudo-grazing incidence X-Ray diffraction method. PhD thesis Génie mécanique et matériaux, ENSAM 2006ENAM0019.
Pham, Chi-Tuân (2006) Viscous flux and turbulence models linearization for aerodynamic shape optimization for turbomachineries. PhD thesis Mécanique, ENSAM 2006ENAM0030.
Restrepo, Tomas (2006) Integration of CSCW tools in new product development: the mechanism of participatory elucidation of needs and the catching module mechanism as learning vectors. PhD thesis Génie industriel, ENSAM 2006ENAM0047.
Richaud, Emmanuel (2006) Durabilité des Géotextiles en Polypropylène. PhD thesis Mécanique et Matériaux, ENSAM 2006ENAM0035.
Rodriguez, Julio (2006) Dehydration by greenhouse effect of a product packed in a water permeable polymeric film: experimental approach and modelling. PhD thesis Génie energétique, ENSAM 2006ENAM0002.
Rossi, Frédéric (2006) Study and understanding of the ageing mechanisms in lead-calcium alloys. PhD thesis Sciences et génie des matériaux, ENSAM 2006ENAM0070 p.206.
Roulet, Nicolas (2006) Modelling of the technological innovation process within SME: Application to the design of a new manufacturing technology based on the laser technique. PhD thesis Génie industriel, ENSAM 2006ENAM0032.
Saidi, Zineb (2006) Detection and localization of buried objects in marin sediment. PhD thesis Traitement du signal et acoustique sous-marine, Institut de Recherche de l'Ecole Navale, ENSAM 2006ENAM0021 p.166.
Scuiller, Franck (2006) Development of design tools for multiphase permanent magnet machines method based on the multi-machine approach. PhD thesis Génie Electrique, Institut de Recherche de l'Ecole Navale, ENSAM 2006ENAM0052 p.232.
Simba Ngabi, Marcellin (2006) Industrial risk assessment method for hygiene, health, safety and environment in oil industry. PhD thesis Génie industriel, ENSAM 2006ENAM0001.
Trabelsi, Walid (2006) Ageing of a carbon/epoxy composite for aeronautic applications. PhD thesis Mécanique et Matériaux, ENSAM 2006ENAM0064.
Verdoux, Vanessa (2006) Proposition of an implementation model of a project risks management method: "Application to two projects of new products design". PhD thesis Génie industriel, ENSAM 2006ENAM0024.
Wiig, Johan (2006) Optimization of fault diagnosis in helicopter health and usage monitoring systems. PhD thesis Automatique, ENSAM 2006ENAM0055 p.158.
Yang, Yanwu (2006) Towards spatial web personalization. PhD thesis Informatique, Institut de Recherche de l'Ecole Navale, ENSAM 2006ENAM0018 p.159.
2005
Assous, Saïd (2005) Time-frequency analysis by the S transform and interpretation of the laser Doppler flowmetry signals: clinic diagnosis applications. PhD thesis Automatique et traitement du signal, ENSAM 2005ENAM0026.
Bahloul, Riadh (2005) Optimisation of the bending process of high strength low alloy sheet mtetal. PhD thesis Génie mécanique et matériaux, ENSAM 2005ENAM0031.
Bassetto, Samuel (2005) Toward a dynamic, operational and "embeded knowledge" manufacturing improvement. PhD thesis Génie Industriel, ENSAM 2005ENAM0009.
Béarée, Richard (2005) Toward the integration of vibratory phenomena int he command generation of high-dynamics machine-tools. PhD thesis Automatique, ENSAM 2005ENAM0030.
Bertrand, Samuel (2005) In vivo 3D geometrical modeling of the human trunk unsing EOS X-Ray system. PhD thesis Biomécanique, ENSAM 2005ENAM0020.
Berviller, Laurent (2005) Integrated design and manufacturing of "net shape" forged products: application on forged differentials. PhD thesis Mécanique, ENSAM 2005ENAM0005.
Bissey, Stéphanie (2005) Development of a cutting forces model applicable to a family of tools: case of milling of hard steels. PhD thesis Procédés de fabrication, ENSAM CER Cluny, ENSAM 2005ENAM0004.
Blanc, Monique (2005) Constrained discret layer model for the computation of thick multilayered composites. PhD thesis Mécanique, ENSAM 2005ENAM0007.
Cimuca, Gabriel-Octavian (2005) Flywheel energy storage system associated to the wind generators. PhD thesis Génie électrique, ENSAM 2005ENAM0027.
Cohen Assouline, Stéphanie (2005) Numerical simulation of machining at macroscopic scale: taking into account the workpiece deformations. PhD thesis Mécanique, ENSAM 2005ENAM0028.
Gaudichet-Maurin, Emmanuelle (2005) Characterisation and ageing of a water ultrafiltration membrane. PhD thesis Mécanique et Matériaux, ENSAM 2005ENAM0019.
Hug, Gregor (2005) Behaviour analysis of carbon-epoxy laminates under high-speed loading: manufacture of the same materials by means of microwave curing for comparison. PhD thesis Mécanique et matériaux, ENSAM 2005ENAM0010.
Le Pochat, Stéphane (2005) ECODESIGN INTEGRATION IN SMEs - PROPOSAL FOR A KNOW-HOW APPROPRIATION METHOD FOR ENVIRONMENTAL PRODUCT DESIGN. PhD thesis Génie industriel, ENSAM 2005ENAM0021.
Lorrain, Jean-Paul (2005) Ductility criterion based on ellipticity loss of the elastic-plastic tangent modulus deduced from a self consistent model. PhD thesis Mécanique et matériaux, ENSAM 2005ENAM0002.
Luong, Thi Hông Liên (2005) Design method for experimental means. The cost-performance coherence analysis. PhD thesis Génie Industriel, ENSAM, ENSAM 2005ENAM0016.
Mendoza Monroy, Rennan Alfonso (2005) Induced morphologies in injection moulded parts of polyolefine. PhD thesis Matériaux, ENSAM 2005ENAM0006.
Mogos, Emmanuel Florin (2005) Distributed generation in distribution network. Pluridisciplinary modeling for the control of sources. PhD thesis génie électrique, ENSAM CER Lille, ENSAM 2005 ENAM0014.
Nicodeau, Célia (2005) Continuous welding modeling of thermoplastic matrix composites. PhD thesis Mécanique et matériaux, ENSAM 2005ENAM0018.
Nourry, Emmanuel (2005) Laminated glass behaviour under perforating impact. PhD thesis Mécanique, ENSAM 2005ENAM0003.
Perrin-Bruneau, Flore (2005) Proposal of an integration strategy of new design methods: elements for definition of the "methods" integrator role. PhD thesis Génie Industriel, ENSAM 2005ENAM0023.
Peultier, Bertrand (2005) Alliages à Mémoire de Forme: Modélisation et Calcul de Structures. PhD thesis Mécanique et Matériau, ENSAM 2005ENSAM0012.
Vallette, Thomas (2005) Research of a conceptual framework of assistance for innovating collective design by the usage: proposal of the tool "Glocal" for the hand tools design ant the work equipment design. PhD thesis Génie industriel, ENSAM 2005ENAM0025.
2004
Bernard, Sébastien (2004) Specification of a multisite collaborative environment: application to the european aeronautical industry. PhD thesis Genie industriel, ENSAM 2004ENAM0029.
Campana, Sophie (2004) Evaluation of the relationship between biomechanical properties and imaging: in vitro study of intervertebral disc. PhD thesis Mécanique, ENSAM 2004ENAM0040.
Champain, Nicolas (2004) Research of biomechanical factors in idiopathic scoliosis aggravation. PhD thesis BIOMECANIQUE, ENSAM 2004ENAM0016.
Cornier, Alain (2004) Water Jetting Milling Model: Application at the Automobile Tyres Dismantling. PhD thesis Mécanique, ENSAM 2004ENAM0007.
Fromentin, Guillaume (2004) Mechanical and technological study of the cold form tapping process applied to hardened steel. PhD thesis Procédés de fabrication, ENSAM 2004ENAM0018.
Hagège, Benjamin (2004) Simulation of the constitutive behavior of fibrous media subjected to large deformations: application to knitted reinforcements. PhD thesis, ENSAM 2004ENAM0024.
Lassagne, Marc (2004) Risk management, corporate strategies and regulation: the case of the maritime industry. PhD thesis Sciences de gestion, ENSAM 2004ENAM0034.
Le Bras, Anthony (2004) Potentialities evaluation of EOS™ device for mechanical characteriation of bone structures: application to the superior extremity of the femur. PhD thesis Biomécanique, ENSAM 2004ENAM0003.
Lévesque, Martin (2004) Nonlinear viscoelastic composite materials mechanical behaviour prediction by a homogenisation approach. PhD thesis Mecanique et materiaux, ENSAM 2004ENAM0043.
List, Gautier (2004) STUDY OF WC-Co TOOL WEAR MECHANISMS BY THE TOOL-CHIP INTERFACE CHARACTERISATION- APPLICATION TO THE DRY MACHINING OF THE AERONAUTIC ALUMINIUM ALLOY AA2024 T351. PhD thesis Mécanique, ENSAM 2004ENAM0041.
Paillot, Damien (2004) Data management for digital mock-up visualization in immersive virtuel environment: application to car design. PhD thesis Informatique, ENSAM 2004ENAM0031.
Pesci, Raphaël (2004) A micromechanical analysis and an experimental characterisation of the behavior and the damaging processes of a 16mnd5 pressure vessel steel at low temperatures. PhD thesis Mécanique et matériaux, ENSAM 2004ENAM0013.
Pradere, Christophe (2004) Thermal and thermomechanical characterisation of carbon and ceramic fibers at very high temperature. PhD thesis Mécanique - Energétique, ENSAM Bordeaux, ENSAM 2004ENAM0021.
Scaravetti, Dominique (2004) Embodiment design problem structuring, for using a decision support system. PhD thesis Mécanique, ENSAM 2004ENAM0032.
Vernat, Yoann (2004) Formalizing and qualifying models for constraint-based embodiment design. PhD thesis Mécanique, ENSAM 2004ENAM0027.
Yvonnet, Julien (2004) New approaches based on the natural neighbor meshfree methods for numerical simulation of forming processes. PhD thesis Mécanique, ENSAM 2004ENAM0039.
2003
Asuaje, Miguel (2003) Methodology and optimization in the design and performance analysis of incompressible fluid turbomachineries. PhD thesis Mécanique, ENSAM.
Avril, Ludovic (2003) Eeperimentation and simulation of H.S.L.A. sheet metal bending bent pats behaviour's prediction during working life. PhD thesis Science des matériaux et génie des procédés, Laboratoire Procédés Matériaux Instrumentation, ENSAM 2003ENAM0016.
Bouchama, Amar (2003) Refroidissement en cascade par flash détente, modélisation par contraintes et aide à la décision. PhD thesis Mécanique, ENSAM 2003ENAM0020.
Camblong, Haritza (2003) Minimisation of the wind perturbations impact on the generation of electricity by variable speed wind turbines. PhD thesis Automatique, ENSAM Bordeaux - Laboratoire Energétique et phénomènes de transfert, ENSAM 2003ENAM0022.
Devanne, Thomas (2003) Vieillissement radiochimique d'un réseau epoxyde. PhD thesis Mécanique et matériaux, ENSAM p.131.
Frechede, Bertrand (2003) Contribution to the study of the behaviour of the cervical spine submitted to impact. PhD thesis Mécanique, ENSAM 2003ENAM0024.
Ghidossi, Patrick (2003) Contribution to the study of the effect of polymer matrix composite specimen machining on their mechanical performances. PhD thesis Procédés de fabrication, ENSAM 2003ENAM0019.
Khelia, Imen (2003) Biomechanical study of manual wheelchair propulsion by elderly suffering or not from shoulder pain. PhD thesis Biomécanique, LBM Laboratoire de Biomécanique, ENSAM numéro d'ordre: 2003-06.
Lim, Dokshin (2003) Modelization of user-centered design of informational appliances: application to the interactive television user interface design. PhD thesis, ENSAM.
Marty, Audrey (2003) Simulation numÉrique de l'usinage par outil coupant À l'Échelle macroscopique: contribution À la dÉfinition gÉomÉtrique de la surface usinÉe. PhD thesis Mécanique, ENSAM.
Minel, Stéphanie (2003) COLLABORATIVE DESIGN APPROACH AND PROPOSITION OF TRADE DATA TRANSFER TOOL: application to a mechanical product " the car seat". PhD thesis Génie Industriel, ENSAM 2003ENAM0030.
Naccarato, Gianni (2003) Aeroelasticity study of tiltrotor concept-whirlflutter. PhD thesis Mécanique, ENSAM 2003ENAM0007.
Nodé-Langlois, Laurent (2003) 3D analysis of the misalignment fo the lower extremity, a pre, per and postoperative study. PhD thesis Biomécanique, ENSAM 2003ENAM0021.
Nouiga, Mohammed (2003) La conduite du changement par la qualité dans un contexte socioculturel. Essai de modélisation systémique et application à l'entreprise marocaine. PhD thesis Genie industriel, CPI, ENSAM p.245.
Perez, Laetitia (2003) Development, study of performances and integration of thermal probes for fouling characterisation of tubular heat exchangers. PhD thesis Mécanique, ENSAM 2003ENAM0025.
Rouff, Carole (2003) Contribution a la caracterisation et a la modelisation du comportement dun acier a letat semi-solide application au thixoforgeage. PhD thesis Mécanique et Matériaux, Laboratoire de physique et de mécanique des matériaux, Metz, ENSAM p.183.
2002
Bassetti, Ann-Laure (2002) Gestion du changement, gestion de projet: convergence - divergence. Cas des risques en conception et mise en place dune organisation de management de lenvironnement. PhD thesis Genie Industriel, CPI, ENSAM p.238.
Berbenni, Stéphane (2002) Elastoviscoplasticité des aciers polycristallins: modélisation micromécanique et physique. Applications au comportement dynamique et à l'effet Bake-Hardening. PhD thesis Mécanique et matériaux, ENSAM 2002ENAM0001.
Dumas, Raphaël (2002) Analyse biomécanique de la correction des scolioses par la technique du modelage in-situ. PhD thesis Mécanique, LBM Laboratoire de Biomécanique, ENSAM p.176.
Ercolino, José (2002) Modélisation en régime nominal et partiel de l'écoulement méridien dans les turbomachines axiales et hélicocentrifuges. PhD thesis Mécanique, Laboratoire d'Energétique et Mécanique des Fluides Internes, ENSAM p.159.
Jacqueson, Loïc (2002) Intégration de l'environnement en entreprise: proposition d'un outil de pilotage du processus de création de connaissances environnementales. PhD thesis Génie Industriel, CPI, ENSAM p.173.
Mathieux, Fabrice (2002) Contribution à lintégration de la valorisation en fin de vie dès la conception dun produit . Une méthode basée sur lévaluation multicritères de la recyclabilité du produit et sur lidentification de ses points faibles de conception. PhD thesis Génie Industriel, Institut Conception, Mécanique, Environnement, Chambéry, ENSAM p.284.
Moraru, George-Florin (2002) The dynamics of the machining system in vibration cutting. PhD thesis Génie Industriel, ENSAM.
Pomero, Vincent (2002) Modélisation géométrique et mécanique des muscles du tronc: relation entre musculature, troubles posturaux et surcharges vertébrales. PhD thesis Mécanique, ENSAM 2002ENAM0005.
Rech, Joël (2002) Contribution à la compréhension des modes d'actions tribologiques et thermiques des revêtements en usinage. Application au cas du taillage de dentures à la fraise-mère à grande vitesse. PhD thesis Procédés de fabrication, ENSAM.
Thouvenin, Eric (2002) Modélisation des processus de conception de produits et développement de la capacité d'innovation: application au cas des PME-PMI. PhD thesis Génie industriel, CPI, ENSAM.
Tonnelier, Pierre (2002) Integration of a new constraint in a carmaker: case of the recovery of the end of life vehicles. PhD thesis Génie industriel, ENSAM 2002ENAM0017.
2001
Bertoluci, Gwenola (2001) Proposition d'une méthode d'amélioration de la cohérence des processus industriels. PhD thesis Génie Industriel, CPI, ENSAM.
Delerba, Frédéric (2001) Modélisation géométrique et mécanique tridimensionnelle du rachis thoracique et lombaire en configuration de choc automobile. PhD thesis Mécanique, ENSAM p.253.
Denninger, Lisa (2001) Analyse biomécanique des interactions homme siège en environnement automobile. Modélisation par éléments finis du corps humain soumis à des vibrations verticales. PhD thesis Biomécanique, ENSAM p.236.
Fayolle, Bruno (2001) Oxidation induced embrittlement in polypropylene. PhD thesis Mécanique et Matériaux, ENSAM 2001ENAM0016 p.179.
Ferrendier, Sophie (2001) Influence de l'évolution granulométrique des abrasifs sur l'enlèvement de matière lors de la découpe par jet d'eau abrasif. PhD thesis Mécanique, ENSAM p.187.
Guo, Fu'An (2001) Influence of microstructure on the mechanical properties and internal stresses of a two-phase TiAl-based intermetallic alloy. PhD thesis Mécanique et matériaux, ENSAM.
Jao Jules, Ericka (2001) Couplages entre propriétés thermiques, réactivité chimique et viscosité des matériaux composites thermodurcissables en relation avec les conditions de leur élaboration fondée sur l'hystérésis diélectrique. PhD thesis Prcédés de fabrication, ENSAM p.242.
Leborgne, Cédric (2001) Proposition d'une démarche anthropocentrée de conception de produits nouveaux basée sur l'usage et destiné à une meilleure intégration, par l'ergonome, des besoins et des attentes des usagers. PhD thesis Génie Industriel, LCPI, ENSAM p.237.
2000
Colin, Xavier (2000) Modélisation cinétique de la thermo-oxydation de matériaux polymères et composites à hautes performances thermomécaniques. PhD thesis Mécanique et matériaux, Laboratoire d'ingénierie des matériaux, ENSAM 2000ENAM0036 p.170.
Janin, Marc (2000) Démarche d'éco-conception en entreprise. Un enjeu: construire la cohérence entre outils et processus. PhD thesis Genie Industriel, ENSAM p.423.
1999
Ollendorff, Christine (1999) Construction d'un diagnostic complexe d'une bibliothèque académique. PhD thesis, CPI, ENSAM p.274.
1997
Bouchard, Carole (1997) Modelling the car design process - definition of method for styling awareness linked to the design of visible components. PhD thesis Génie industriel, ENSAM 1997ENAM0014.
1995
Christofol, Hervé (1995) Modélisation systémique du processus de conception de la coloration d’un produit. PhD thesis Génie industriel, Laboratoire Conception de Produits Nouveaux, ENSAM 1995ENAM0025 p.203.
Gautier, Rémy (1995) QUALITE EN CONCEPTION DE PRODUITS NOUVEAUX "proposition d'une méthode de fiabilisation du processus de management de l'information". PhD thesis Génie Industriel, Conception de Produits et Innovation, ENSAM p.221.
This list was generated on Wed Mar 10 20:07:16 CET 2010.