- Ecole Doctorale (1067)
- ED 432 ECOLE DOCTORALE SCIENCES DES METIERS DE L'INGENIEUR (179)
Number of items: 179.
2008
Atmani, Hakim (2008) Virtual system for an aided shoulder surgery. PhD thesis Informatique, Le2i, ENSAM 2008ENAM0002 p.170.
2007
Alfano, David (2007) Transonic buffet simulation and shape optimisation. PhD thesis Mécanique, ENSAM 2007ENAM0011 p.222.
Alizard, Frédéric (2007) Global linear stability analysis of a flat plate separated flow. PhD thesis Mécanique, SINUMEF, ENSAM 2007ENAM0036 p.174.
Aloui, Saber (2007) Contribution à la modélisation et l'analyse du risque dans une organisation de santé au moyen d'une approche système. PhD thesis Sciences et Génie des Activités à Risques, EMA- Centre de recherche LGI2P, ENSMP p.155.
Amann, Jean-Marc (2007) Study of CO2 capture processes in power plants. PhD thesis Génie des Procédés, CEP - Centre Energétique et Procédés, ENSMP p.188.
Baudoin, Aurélien (2007) Pre and post operative analysis of the hip using 3D reconstructions from biplanar low dose X-rays. PhD thesis Biomécanique, ENSAM 2007ENAM0033 p.177.
Bilat, Anne-Sophie (2007) Estimation du risque de rupture fragile de soudures de pipelines en aciers à haut grade : caractérisation et modélisation. PhD thesis Sciences et génie des matériaux, Centre des Matériaux P.M. Fourt, ENSMP p.300.
Cambon, Julien (2007) Towards a new methodology for measuring the performance of Occupational Health and Safety Management Systems. PhD thesis Sciences et Génie des Activités à Risques, Pôle Cindyniques, ENSMP p.291.
Chalbaud, Carlos (2007) CO2 interfacial properties : application to multiphase flow at reservoir conditions. PhD thesis Mécanique, ENSAM 2007ENAM0009 p.228.
Coquillat, Marie (2007) Ageing of polybutadiene based propellants : kinetic modelling of oxidation. PhD thesis Mécanique et Matériaux, ENSAM 2007ENAM0021 p.186.
Dalloz, Alexandre (2007) Study of the damage induced by the shear cutting process in dual phase steels for automotive application. PhD thesis Sciences et génie des matériaux, MAT- Centre des Matériaux P.M. Fourt, ENSMP p.193.
Delqué, Mélissa (2007) Influence of microstructure on the tribological behaviour of composite coatings obtained by plasma spraying. PhD thesis Sciences et génie des matériaux, MAT- Centre des Matériaux P.M. Fourt, ENSMP p.178.
Denis-remis, Cédric (2007) Approach of risk management by stakeholders training. PhD thesis Sciences et Génie des Activités à Risques, Pôle Cindyniques, ENSMP p.289.
Dhiaf, Mohamed Mahjoub (2007) Proposition a model measure of the impact of the total quality management on the global performance : case study of Tunisian textile clothing industry. PhD thesis Génie industriel, ENSAM 2007ENAM0013 p.261.
Douadji, Lyes (2007) Uniform heat treatment of the non metal composites by means of the dielectric effect of attenuation of electromagnetic waves. PhD thesis Energétique et génie des procédés, ENSAM 2007ENAM0006 p.204.
Duplessis Kergomard, Yann (2007) Experimental and numerical study about intralaminar fissuration and free edge delamination on pseudo woven laminated composites structures. PhD thesis Sciences et génie des matériaux, MAT-Centre des Matériaux P.M. Fourt, ENSMP p.237.
Fedala, Djaafer (2007) Modeling of broadband noise radiated by an airfoil : application to turbomachinery. PhD thesis Mécanique, ENSAM 2007ENAM0034 p.160.
Fournier, Benjamin (2007) Fatigue-fluage des aciers martensitiques à 9-12%Cr : comportement et endommagement. PhD thesis Sciences et génie des matériaux, Centre des Matériaux P.M. Fourt, ENSMP p.525.
Goubier, Jean-Noël (2007) In vivo kinematics of the trapezometacarpal joint. PhD thesis Biomécanique, ENSAM 2007ENAM0008 p.138.
Guo, Baoqiao (2007) Simultaneous identification of stiffness and damping parameters from full field measurements on isotropic vibrating plates by the virtual fields method. PhD thesis mécanique, ENSAM 2007ENAM0010 p.196.
Haddag, Badis (2007) Contribution to the modelling of sheet metal forming : application to spring-back and localization. PhD thesis Mécanique, ENSAM 2007ENAM0002 p.203.
Harscoet, Erwan (2007) Design of an environmental management accounting system oriented toward value creation : application to a pollution prevention investment. PhD thesis Génie industriel, ENSAM 2007ENAM0022 p.373.
Hennebelle, François (2007) Determination of measurements uncertainties on coordinate measuring machines application to gears. PhD thesis Mécanique et Matériaux, ENSAM 2007ENAM0035 p.275.
Huang, Wenjun (2007) Grain scale stresses and strains determination by X-ray. PhD thesis Génie mécanique et matériaux, ENSAM 2007ENAM0003 p.142.
Jolivet, Erwan (2007) Biomechanical modelisation of hip for hip fracture risk. PhD thesis Biomécanique, ENSAM 2007ENAM0019 p.176.
Joubert de La Motte, Pascal (2007) Characteristic time-step scheme for transonic flows and optimum aeroelastic design of wing with a large aspect ratio. PhD thesis Mécanique, ENSAM 2007ENAM0005.
Jourieh, Munif (2007) Development of a representative model of a wind turbine in order to study the installation of several machines on a wind park. PhD thesis Mécanique, ENSAM 2007ENAM0032 p.149.
Kaminski, Myriam (2007) Fatigue damage modelling of single crystal turbine blades containing stress concentration regions. PhD thesis Sciences et génie des matériaux, Centre des Matériaux P.M. Fourt, ENSMP p.254.
Le lan, Jean-Vincent (2007) A study on simplified methods for machining simulation at a macroscopic scale. PhD thesis Mécanique, ENSAM 2007ENAM0045 p.142.
Lopez, Cédric (2007) Optimization methods for helicopter landing gears. PhD thesis Conception, LSIS, ENSAM 2007ENAM0038 p.175.
Mareau, Charles (2007) Micromechanical modeling of self-heating and microplasticity in steels under cyclic loading. PhD thesis Mécanique et Matériaux, Laboratoire de Physique et Mécanique des Matériaux, ENSAM 2007ENAM0037 p.216.
Mazière, Matthieu (2007) Burst of turboengine disks. PhD thesis Sciences et génie des matériaux, Centre des Matériaux P.M. Fourt, ENSMP p.159.
Missoum Benziane, Djamel (2007) A new fully coupled two-scales modelling for mechanical problems involving microstructure : the 95/5 technique. PhD thesis Mécanique, ENSAM 2007ENAM0007 p.127.
Moulart, Raphaël (2007) Development and implementation of a full-field strain measurement method at the micrometric scale. PhD thesis Mécanique, ENSAM 2007ENAM0031 p.160.
Noyon, Valérie (2007) A relative and spatio-temporal model of geographic trajectories. PhD thesis Informatique, IRENav, Ecole navale, ENSAM 2007ENAM0023 p.218.
Rousseau, Marc-Antoine (2007) Cervical disc arthroplasty : evaluation methods and biomechanical analysis. PhD thesis Biomécanique, ENSAM 2007ENAM0020 p.96.
Sanchez, Céline (2007) Specification and Implementation of a Multicriteria Decision-Making Aid System for Preventive Maintenance and Assets Management for the ESCOTA motorway operator : the SINERGIE project. PhD thesis Sciences et Génie des Activités à Risques, Pôle Cindyniques, ENSMP p.197.
Singland, Jean-Dominique (2007) Mechanical and clinical evaluation of home made abdominal aortic endograft. PhD thesis Biomécanique, ENSAM 2007ENAM0012 p.132.
Siska, Filip (2007) Continuum vs. dislocation dynamics modelling of thin films. PhD thesis Sciences et génie des matériaux, Centre des Matériaux P.M. Fourt, ENSMP p.195.
Slim, Rayan (2007) Modelling and design of a drying system by solar greenhouse associated with heat pumps for sewage sludge. PhD thesis Energétique, CEP - Centre Energétique et Procédés p.132.
Südhoff, Ingrid (2007) Geometrical and mechanical patient specific modeling of the locomotor system. PhD thesis Biomécanique, ENSAM 2007ENAM0029 p.258.
Triconnet, Karen (2007) Mechanical properties identification from full-filled measurement in a multi-phase material. PhD thesis Mécanique, ENSAM 2007ENAM0014 p.222.
Verhille, Jean-Noël (2007) Energetique Macroscopique Representation of subway VAL 206 and deduced inversion based control. PhD thesis Automatique, ENSAM 2007ENAM0018 p.254.
Wronski, Sebastian (2007) Examination of residual stresses in heterogeneous textured materials using diffraction and deformation models. PhD thesis Mécanique et Matériaux, Université de sciences et technologie AGH de Cracovie, ENSAM 2007ENAM0017 p.160.
Xavier, José (2007) Characterisation of the wood stiffness variability within the stem by the virtual fields method : application to P.pinaster in the LR plane. PhD thesis Mécanique, ENSAM 2007ENAM0030 p.151.
Younsi, Mohand (2007) Numerical and experimental unsteady flow and aeroacoustic behavior of forward centrifugal fans. PhD thesis Mécanique, ENSAM 2007ENAM0027 p.156.
2006
Abouzahir, Omar (2006) Conception of a tool for measure and reduction of the quality costs: case of the piloting of industrial processes. PhD thesis Génie industriel, ENSAM 2006ENAM0059.
Arbaoui, Abdelaziz (2006) Decision support for the definition of wind turbine systems : adequacy to site specificities and weak electrical networks. PhD thesis Mécanique, ENSAM 2006ENAM0027 p.133.
Bastard, Myriam (2006) Durability thermoplastic pieces: application to polyoxymethylene. PhD thesis Mécanique et Matériaux, ENSAM 2006ENAM0003.
Baudouin, Cyrille (2006) Contribution to the qualification of a manufacturing process by a dimensional approach : application to "net shape" formed bevel gears. PhD thesis Génie mécanique, ENSAM 2006ENAM0048.
Benabes, Jérôme (2006) Non local energy fatigue life calculation approach of structures in multiaxial fatigue under variable amplitude loadings : application to a railway wheel. PhD thesis Mécanique, ENSAM 2006ENAM0069 p.231.
Berrahmoune, Mohamed Reda (2006) Martensitic transformation and delayed cracking phenomenon in the 301LN unstable austenitic steel. PhD thesis Mécanique et Matériaux, ENSAM, ENSAM 2006ENAM0041 p.186.
Bonin, Vincent (2006) Analytical modelling of chip formation during beech green wood rotary veneer cutting process. PhD thesis Mécanique, ENSAM 2006ENAM0022.
Boutrouft, Keltoum (2006) Rayleigh-Taylor like thermal instabilities in supercritical fluids. PhD thesis Mécanique, ENSAM 2006ENAM0067.
Broc, Jean-Sébastien (2006) L'EVALUATION EX-POST DES OPERATIONS LOCALES DE MAITRISE DE LA DEMANDE EN ENERGIE Etat de l'art, méthodes bottom-up, exemples appliqués et approche du développement d'une culture pratique de l'évaluation. PhD thesis Energétique, Ecole des Mines de Nantes - Systèmes Energétiques et Environnement, ENSMP p.669.
Bruyère, Jérôme (2006) Bevel gear design: anlaysis and synthesis of geometry and tolerances. PhD thesis Mécanique et génie mécanique, ENSAM 2006ENAM40.
Caceres Salazar, Gustavo Ernesto (2006) Modeling of drying for a saturated deformable porous media: taking into account the liquid pressure. PhD thesis Mécanique, ENSAM 2006ENAM0012.
Charpail, Estelle (2006) Mechanical behavior analysis of human ribs in dynamics. PhD thesis Mécanique, ENSAM 2006ENAM0036 p.300.
Chevalot, Nicolas (2006) Analysis and simulation of in seated human prehensible and reaching movements for ergonomic uses. PhD thesis Biomécanique, ENSAM 2006ENAM0066.
Corduan, Nolwenn (2006) Study of vibratory behaviour of thin walled parts in finishing milling operations : application on blades of high pressure aeronautical turbo compressor. PhD thesis Génie mécanique, ENSAM 2006ENAM0011 p.139.
Croston, Tania (2006) Experimental study of short reinforced concrete beam behavior repaired by two fiber reinforced polymer methods through three points bending test (probabilistic approach). PhD thesis Mécanique, ENSAM 2006ENAM0017 p.242.
Dakhlaoui, Rim (2006) Analyze of phase's mechanical behaviour of a multiphase polycristalline alloy by X-ray and neutron diffraction. PhD thesis Mécanique et Matériaux, ENSAM 2006ENAM0044.
De Luca, Livio (2006) Surveying and multi-representation of architectural heritage : definition of an hybrid approach for 3D reconstruction of buildings. PhD thesis Conception, ENSAM 2006ENAM0009 p.217.
De Rouvray, Alexandre (2006) Integrating emotional and sensory preferences in the design of furniture: proposal of an affective engineering method. PhD thesis Génie industriel, ENSAM 2006ENAM0063.
Denaud, Louis Etienne (2006) Vibro-acoustic analysis of the peeling process. PhD thesis Mécanique, ENSAM 2006ENAM0043.
Dieye, Mamadou (2006) Dynamic behavior of the worpiece/tool/machine (WTM) in creep feed grinding process. PhD thesis Génie mécanique, ENSAM 2006ENAM0020 p.151.
Diolez, Gilles (2006) Geometric position control : towards new tools more efficient. PhD thesis Génie mécanique, ENSAM 2006ENAM0029.
Dray Bensahkoun, Delphine (2006) Predictin of the thermoelastic properties of an injection molded short-fiber composite. PhD thesis Mécanique et matériaux, ENSAM 2006ENAM0008.
Duchemin, Laure (2006) Personalized finite element modelling of the proximal femur for fracture risk prediction. PhD thesis Mécanique, ENSAM 2006ENAM0010.
Dumenil-Lefebvre, Anne (2006) Integration of sensory aspects in the design of glass packaging: development of a methodological instrument based on the techniques of sensory assessment. PhD thesis Génie industriel, ENSAM 2006ENAM0006.
Dupont, Maxime (2006) Potentiel d’économies d’énergie par les services énergétiques – Application au cycle de vie des équipements de conversion de l’énergie. PhD thesis, ENSMP - CEP Centre Energétique et Procédés, ENSMP p.251.
Falissard, Fabrice (2006) Vorticity preserving numerical schemes in compressible aerodynamics. PhD thesis Mécanique, ENSAM 2006ENAM0005.
Fischer, Florent (2006) Synthèse et étude de matériaux nanostructurés à base d'acétate de cellulose pour applications énergétiques. PhD thesis Energétique, ENSMP - CEP Centre Energétique et Procédés, ENSMP.
Germain, Guenaël (2006) A contribution towards the optimisation of Laser Assisted Machining. PhD thesis Mécanique, matériaux et procédés, ENSAM 2006ENAM0051.
Gille, Olivier (2006) Tool for evaluating trunk muscles using MRI: application to study of posture and muscular lesions secondary to surgery. PhD thesis Biomécanique, ENSAM 2006ENAM0054.
Goujon, Hélène (2006) Gait analysis of transfemoral amputee. PhD thesis Mécanique, ENSAM 2006ENAM0042.
Graff, Stéphanie (2006) Viscoplastic behavior of zirconium alloys in the temperatures range 20°C-400°C : characterization and modeling of strain ageing phenomena. PhD thesis Sciences et Génie des Matériaux, ENSMP - Centre des Matériaux P.M. Fourt, ENSMP p.319.
Habak, Malek (2006) A study of the influence of the microstructure and cutting parameters on the material behaviour of bearing steel 100Cr6 in hard turning. PhD thesis Mécanique, Matériaux, Procédés, ENSAM 2006ENAM0057.
Haoues, Nizar (2006) Contribution to integrate constraints of dismantling and recycling in the first phases of design of products. PhD thesis Génie Industriel, ENSAM 2006ENAM0014.
Haÿne Lecocq, Bénédicte (2006) Study of acoustic comportment of cavitary materials. PhD thesis Acoustique, ENSAM 2006ENAM0050.
Kaouache, Belkhiri (2006) Multiscales analysis of stress induced martensitic transformation in the shape memory alloys: microstructure-stresses correlation. PhD thesis Mécanique et Matériaux, ENSAM 2006ENAM0034.
Khelidj, Nadjet (2006) Ageing of cable insulators made of polyethylene in nuclear environment. PhD thesis Mécanique et matériaux, ENSAM 2006ENAM0033.
Kloczko, Thibaud (2006) A matrix-free implicit treatment for all speed flows on unstructured grids. PhD thesis Mécanique, ENSAM 2006ENAM0007.
Labbe, Julien (2006) Hydrogen-based energy storage UNIT for STAND ALone PV systems. PhD thesis Energétique, ENSMP - CEP Centre Energétique et Procédés, ENSMP.
Labidi, Chafik (2006) Improvement of wood machining tools' service life by surface treatments and cutting edges's modifications. PhD thesis Mécanique et matériaux, ENSAM 2006ENAM0058 p.184.
Lafon-Jalby, Yoann (2006) Finite element simulation of various strategies for scoliosis surgical correction. PhD thesis Biomécanique, ENSAM 2006ENAM0061.
Lattanzio, Thierry (2006) Characterisation of firms organised in "engineer-to-order". PhD thesis Génie industriel, ENSAM 2006ENAM0039 p.178.
Lattuf, José Antonio (2006) Assistance to piloting innovation process in products design : towards an extended requirements document. PhD thesis Génie industriel, ENSAM 2006ENAM0060 p.208.
Le Clerc, Christophe (2006) Mécanismes microstructuraux impliqués dans la fatigue des fibres thermoplastiques. PhD thesis Sciences et Génie des Matériaux, ENSMP - Centre des Matériaux P.M. Fourt, ENSMP p.233.
Madi, Kamel (2006) Influence de la morphologie tridimensionnelle des phases sur le comportement mécanique de réfractaires électrofondus. PhD thesis Sciences et génie des matériaux, ENSMP - Centre des Matériaux P.M. Fourt, ENSMP.
Mantelet, Fabrice (2006) Consideration of the emotional perception of the consumers within the design process. PhD thesis Génie industriel, ENSAM 2006ENAM0038.
Maquin, François (2006) Experimental methodology for the study of the thermomechanical behaviour of materials under cyclic loading. PhD thesis Mécanique et Matériaux, ENSAM 2006ENAM0045.
Martin, Lionel (2006) Development of integrated design tool and methodology for the foundry industry. PhD thesis Génie mécanique, ENSAM 2006ENAM0062.
Masmoudi, Yasmine (2006) Study of the supercritical co2 drying for the elaboration of nanostructured materials: application to monolithic silica aerogels. PhD thesis Energétique, ENSMP - CEP Centre Energétique et Procédés, ENSMP.
Mathieu, Jean-Philippe (2006) Micromechanical analysis and modelling of the behavior and brittle fracture of a french 16MND5 steel: role of microstructural heterogeneities. PhD thesis Mécanique et Matériaux, ENSAM 2006ENAM0037.
Mejri-Chtioui, Imène (2006) Analysis of non stationnary cavitating flow through inducers. PhD thesis Mécanique, ENSAM 2006ENAM13.
Mercier, Julien (2006) Prise en compte du vieillissement et de l’endommagement dans le dimensionnement de structures en matériaux composites. PhD thesis Sciences et génie des matériaux, ENSMP - Centre des Matériaux P.M. Fourt, ENSMP p.246.
Micouin, Patrice (2006) Proposals for the definition and the implementation of systems engineering processes : application int the case of the concurrent desing in the area of car industry. PhD thesis Génie Industriel, ENSAM 2006ENAM0028 p.178.
Mokraoui, Salim (2006) Mesures et modélisation des solubilités mutuelles dans les systèmes aqueux hydrocarbures-alcanolamines. PhD thesis Génie des Procédés, ENSMP - CEP Centre Energétique et Procédés, ENSMP p.142.
Moreno, Maryline (2006) Carbon nanoparticles synthesis by gas phase non-equilibrium plasma. PhD thesis Energétique, ENSMP - CEP Centre Energétique et Procédés, ENSMP.
Pannier, Yannick (2006) Identification of elasto-plastic parameters from statically-undetermined tests : experimental application and validation of the virtual field method. PhD thesis Mécanique, ENSAM 2006ENAM0026.
Peng, Jun (2006) Determination of residual stresses in coating by pseudo-grazing incidence X-Ray diffraction method. PhD thesis Génie mécanique et matériaux, ENSAM 2006ENAM0019.
Pham, Chi-Tuân (2006) Viscous flux and turbulence models linearization for aerodynamic shape optimization for turbomachineries. PhD thesis Mécanique, ENSAM 2006ENAM0030.
Rahhal, Charbel (2006) Conception d'une pompe à chaleur air/eau à haute efficacité énergétique pour la réhabilitation d'installations de chauffage existantes. PhD thesis Energétique, ENSMP - CEP Centre Energétique et Procédés, ENSMP p.175.
Restrepo, Tomas (2006) Integration of CSCW tools in new product development: the mechanism of participatory elucidation of needs and the catching module mechanism as learning vectors. PhD thesis Génie industriel, ENSAM 2006ENAM0047.
Richaud, Emmanuel (2006) Durabilité des Géotextiles en Polypropylène. PhD thesis Mécanique et Matériaux, ENSAM 2006ENAM0035.
Rodriguez, Julio (2006) Dehydration by greenhouse effect of a product packed in a water permeable polymeric film: experimental approach and modelling. PhD thesis Génie energétique, ENSAM 2006ENAM0002.
Rossi, Frédéric (2006) Study and understanding of the ageing mechanisms in lead-calcium alloys. PhD thesis Sciences et génie des matériaux, ENSAM 2006ENAM0070 p.206.
Roulet, Nicolas (2006) Modelling of the technological innovation process within SME: Application to the design of a new manufacturing technology based on the laser technique. PhD thesis Génie industriel, ENSAM 2006ENAM0032.
Saidi, Zineb (2006) Detection and localization of buried objects in marin sediment. PhD thesis Traitement du signal et acoustique sous-marine, Institut de Recherche de l'Ecole Navale, ENSAM 2006ENAM0021 p.166.
Scuiller, Franck (2006) Development of design tools for multiphase permanent magnet machines method based on the multi-machine approach. PhD thesis Génie Electrique, Institut de Recherche de l'Ecole Navale, ENSAM 2006ENAM0052 p.232.
Simba Ngabi, Marcellin (2006) Industrial risk assessment method for hygiene, health, safety and environment in oil industry. PhD thesis Génie industriel, ENSAM 2006ENAM0001.
Trabelsi, Walid (2006) Ageing of a carbon/epoxy composite for aeronautic applications. PhD thesis Mécanique et Matériaux, ENSAM 2006ENAM0064.
Verdoux, Vanessa (2006) Proposition of an implementation model of a project risks management method: "Application to two projects of new products design". PhD thesis Génie industriel, ENSAM 2006ENAM0024.
Wiig, Johan (2006) Optimization of fault diagnosis in helicopter health and usage monitoring systems. PhD thesis Automatique, ENSAM 2006ENAM0055 p.158.
Yang, Yanwu (2006) Towards spatial web personalization. PhD thesis Informatique, Institut de Recherche de l'Ecole Navale, ENSAM 2006ENAM0018 p.159.
2005
Assous, Saïd (2005) Time-frequency analysis by the S transform and interpretation of the laser Doppler flowmetry signals: clinic diagnosis applications. PhD thesis Automatique et traitement du signal, ENSAM 2005ENAM0026.
Bahloul, Riadh (2005) Optimisation of the bending process of high strength low alloy sheet mtetal. PhD thesis Génie mécanique et matériaux, ENSAM 2005ENAM0031.
Bassetto, Samuel (2005) Toward a dynamic, operational and "embeded knowledge" manufacturing improvement. PhD thesis Génie Industriel, ENSAM 2005ENAM0009.
Béarée, Richard (2005) Toward the integration of vibratory phenomena int he command generation of high-dynamics machine-tools. PhD thesis Automatique, ENSAM 2005ENAM0030.
Bertrand, Samuel (2005) In vivo 3D geometrical modeling of the human trunk unsing EOS X-Ray system. PhD thesis Biomécanique, ENSAM 2005ENAM0020.
Berviller, Laurent (2005) Integrated design and manufacturing of "net shape" forged products: application on forged differentials. PhD thesis Mécanique, ENSAM 2005ENAM0005.
Bissey, Stéphanie (2005) Development of a cutting forces model applicable to a family of tools: case of milling of hard steels. PhD thesis Procédés de fabrication, ENSAM CER Cluny, ENSAM 2005ENAM0004.
Blanc, Monique (2005) Constrained discret layer model for the computation of thick multilayered composites. PhD thesis Mécanique, ENSAM 2005ENAM0007.
Cimuca, Gabriel-Octavian (2005) Flywheel energy storage system associated to the wind generators. PhD thesis Génie électrique, ENSAM 2005ENAM0027.
Cohen Assouline, Stéphanie (2005) Numerical simulation of machining at macroscopic scale: taking into account the workpiece deformations. PhD thesis Mécanique, ENSAM 2005ENAM0028.
Gaudichet-Maurin, Emmanuelle (2005) Characterisation and ageing of a water ultrafiltration membrane. PhD thesis Mécanique et Matériaux, ENSAM 2005ENAM0019.
Le Pochat, Stéphane (2005) ECODESIGN INTEGRATION IN SMEs - PROPOSAL FOR A KNOW-HOW APPROPRIATION METHOD FOR ENVIRONMENTAL PRODUCT DESIGN. PhD thesis Génie industriel, ENSAM 2005ENAM0021.
Lorrain, Jean-Paul (2005) Ductility criterion based on ellipticity loss of the elastic-plastic tangent modulus deduced from a self consistent model. PhD thesis Mécanique et matériaux, ENSAM 2005ENAM0002.
Luong, Thi Hông Liên (2005) Design method for experimental means. The cost-performance coherence analysis. PhD thesis Génie Industriel, ENSAM, ENSAM 2005ENAM0016.
Massard, Ludovic (2005) Etude du fluage de réfractaires électrofondus du système alumine-zircone-silice. PhD thesis Sciences et génie des matériaux, Centre des Matériaux P.M. Fourt, ENSMP p.212.
Mendoza Monroy, Rennan Alfonso (2005) Induced morphologies in injection moulded parts of polyolefine. PhD thesis Matériaux, ENSAM 2005ENAM0006.
Mogos, Emmanuel Florin (2005) Distributed generation in distribution network. Pluridisciplinary modeling for the control of sources. PhD thesis génie électrique, ENSAM CER Lille, ENSAM 2005 ENAM0014.
Nourry, Emmanuel (2005) Laminated glass behaviour under perforating impact. PhD thesis Mécanique, ENSAM 2005ENAM0003.
Perrin-Bruneau, Flore (2005) Proposal of an integration strategy of new design methods: elements for definition of the "methods" integrator role. PhD thesis Génie Industriel, ENSAM 2005ENAM0023.
Peultier, Bertrand (2005) Alliages à Mémoire de Forme: Modélisation et Calcul de Structures. PhD thesis Mécanique et Matériau, ENSAM 2005ENSAM0012.
Vallette, Thomas (2005) Research of a conceptual framework of assistance for innovating collective design by the usage: proposal of the tool "Glocal" for the hand tools design ant the work equipment design. PhD thesis Génie industriel, ENSAM 2005ENAM0025.
2004
Bernard, Sébastien (2004) Specification of a multisite collaborative environment: application to the european aeronautical industry. PhD thesis Genie industriel, ENSAM 2004ENAM0029.
Campana, Sophie (2004) Evaluation of the relationship between biomechanical properties and imaging: in vitro study of intervertebral disc. PhD thesis Mécanique, ENSAM 2004ENAM0040.
Champain, Nicolas (2004) Research of biomechanical factors in idiopathic scoliosis aggravation. PhD thesis BIOMECANIQUE, ENSAM 2004ENAM0016.
Cornier, Alain (2004) Water Jetting Milling Model: Application at the Automobile Tyres Dismantling. PhD thesis Mécanique, ENSAM 2004ENAM0007.
Fromentin, Guillaume (2004) Mechanical and technological study of the cold form tapping process applied to hardened steel. PhD thesis Procédés de fabrication, ENSAM 2004ENAM0018.
Hagège, Benjamin (2004) Simulation of the constitutive behavior of fibrous media subjected to large deformations: application to knitted reinforcements. PhD thesis, ENSAM 2004ENAM0024.
Lassagne, Marc (2004) Risk management, corporate strategies and regulation: the case of the maritime industry. PhD thesis Sciences de gestion, ENSAM 2004ENAM0034.
Le Bras, Anthony (2004) Potentialities evaluation of EOS™ device for mechanical characteriation of bone structures: application to the superior extremity of the femur. PhD thesis Biomécanique, ENSAM 2004ENAM0003.
Lévesque, Martin (2004) Nonlinear viscoelastic composite materials mechanical behaviour prediction by a homogenisation approach. PhD thesis Mecanique et materiaux, ENSAM 2004ENAM0043.
List, Gautier (2004) STUDY OF WC-Co TOOL WEAR MECHANISMS BY THE TOOL-CHIP INTERFACE CHARACTERISATION- APPLICATION TO THE DRY MACHINING OF THE AERONAUTIC ALUMINIUM ALLOY AA2024 T351. PhD thesis Mécanique, ENSAM 2004ENAM0041.
Paillot, Damien (2004) Data management for digital mock-up visualization in immersive virtuel environment: application to car design. PhD thesis Informatique, ENSAM 2004ENAM0031.
Pesci, Raphaël (2004) A micromechanical analysis and an experimental characterisation of the behavior and the damaging processes of a 16mnd5 pressure vessel steel at low temperatures. PhD thesis Mécanique et matériaux, ENSAM 2004ENAM0013.
Pradere, Christophe (2004) Thermal and thermomechanical characterisation of carbon and ceramic fibers at very high temperature. PhD thesis Mécanique - Energétique, ENSAM Bordeaux, ENSAM 2004ENAM0021.
Scaravetti, Dominique (2004) Embodiment design problem structuring, for using a decision support system. PhD thesis Mécanique, ENSAM 2004ENAM0032.
Vernat, Yoann (2004) Formalizing and qualifying models for constraint-based embodiment design. PhD thesis Mécanique, ENSAM 2004ENAM0027.
Yvonnet, Julien (2004) New approaches based on the natural neighbor meshfree methods for numerical simulation of forming processes. PhD thesis Mécanique, ENSAM 2004ENAM0039.
2003
Asuaje, Miguel (2003) Methodology and optimization in the design and performance analysis of incompressible fluid turbomachineries. PhD thesis Mécanique, ENSAM.
Avril, Ludovic (2003) Eeperimentation and simulation of H.S.L.A. sheet metal bending bent pats behaviour's prediction during working life. PhD thesis Science des matériaux et génie des procédés, Laboratoire Procédés Matériaux Instrumentation, ENSAM 2003ENAM0016.
Bouchama, Amar (2003) Refroidissement en cascade par flash détente, modélisation par contraintes et aide à la décision. PhD thesis Mécanique, ENSAM 2003ENAM0020.
Camblong, Haritza (2003) Minimisation of the wind perturbations impact on the generation of electricity by variable speed wind turbines. PhD thesis Automatique, ENSAM Bordeaux - Laboratoire Energétique et phénomènes de transfert, ENSAM 2003ENAM0022.
Devanne, Thomas (2003) Vieillissement radiochimique d'un réseau epoxyde. PhD thesis Mécanique et matériaux, ENSAM p.131.
Frechede, Bertrand (2003) Contribution to the study of the behaviour of the cervical spine submitted to impact. PhD thesis Mécanique, ENSAM 2003ENAM0024.
Ghidossi, Patrick (2003) Contribution to the study of the effect of polymer matrix composite specimen machining on their mechanical performances. PhD thesis Procédés de fabrication, ENSAM 2003ENAM0019.
Khelia, Imen (2003) Biomechanical study of manual wheelchair propulsion by elderly suffering or not from shoulder pain. PhD thesis Biomécanique, LBM Laboratoire de Biomécanique, ENSAM numéro d'ordre: 2003-06.
Lim, Dokshin (2003) Modelization of user-centered design of informational appliances: application to the interactive television user interface design. PhD thesis, ENSAM.
Marty, Audrey (2003) Simulation numÉrique de l'usinage par outil coupant À l'Échelle macroscopique: contribution À la dÉfinition gÉomÉtrique de la surface usinÉe. PhD thesis Mécanique, ENSAM.
Minel, Stéphanie (2003) COLLABORATIVE DESIGN APPROACH AND PROPOSITION OF TRADE DATA TRANSFER TOOL: application to a mechanical product " the car seat". PhD thesis Génie Industriel, ENSAM 2003ENAM0030.
Naccarato, Gianni (2003) Aeroelasticity study of tiltrotor concept-whirlflutter. PhD thesis Mécanique, ENSAM 2003ENAM0007.
Nodé-Langlois, Laurent (2003) 3D analysis of the misalignment fo the lower extremity, a pre, per and postoperative study. PhD thesis Biomécanique, ENSAM 2003ENAM0021.
Nouiga, Mohammed (2003) La conduite du changement par la qualité dans un contexte socioculturel. Essai de modélisation systémique et application à l'entreprise marocaine. PhD thesis Genie industriel, CPI, ENSAM p.245.
Perez, Laetitia (2003) Development, study of performances and integration of thermal probes for fouling characterisation of tubular heat exchangers. PhD thesis Mécanique, ENSAM 2003ENAM0025.
Rouff, Carole (2003) Contribution a la caracterisation et a la modelisation du comportement dun acier a letat semi-solide application au thixoforgeage. PhD thesis Mécanique et Matériaux, Laboratoire de physique et de mécanique des matériaux, Metz, ENSAM p.183.
2002
Dumas, Raphaël (2002) Analyse biomécanique de la correction des scolioses par la technique du modelage in-situ. PhD thesis Mécanique, LBM Laboratoire de Biomécanique, ENSAM p.176.
Ercolino, José (2002) Modélisation en régime nominal et partiel de l'écoulement méridien dans les turbomachines axiales et hélicocentrifuges. PhD thesis Mécanique, Laboratoire d'Energétique et Mécanique des Fluides Internes, ENSAM p.159.
Mathieux, Fabrice (2002) Contribution à lintégration de la valorisation en fin de vie dès la conception dun produit . Une méthode basée sur lévaluation multicritères de la recyclabilité du produit et sur lidentification de ses points faibles de conception. PhD thesis Génie Industriel, Institut Conception, Mécanique, Environnement, Chambéry, ENSAM p.284.
Moraru, George-Florin (2002) The dynamics of the machining system in vibration cutting. PhD thesis Génie Industriel, ENSAM.
Pomero, Vincent (2002) Modélisation géométrique et mécanique des muscles du tronc: relation entre musculature, troubles posturaux et surcharges vertébrales. PhD thesis Mécanique, ENSAM 2002ENAM0005.
Rech, Joël (2002) Contribution à la compréhension des modes d'actions tribologiques et thermiques des revêtements en usinage. Application au cas du taillage de dentures à la fraise-mère à grande vitesse. PhD thesis Procédés de fabrication, ENSAM.
Thouvenin, Eric (2002) Modélisation des processus de conception de produits et développement de la capacité d'innovation: application au cas des PME-PMI. PhD thesis Génie industriel, CPI, ENSAM.
Tonnelier, Pierre (2002) Integration of a new constraint in a carmaker: case of the recovery of the end of life vehicles. PhD thesis Génie industriel, ENSAM 2002ENAM0017.
2001
Guo, Fu'An (2001) Influence of microstructure on the mechanical properties and internal stresses of a two-phase TiAl-based intermetallic alloy. PhD thesis Mécanique et matériaux, ENSAM.
1997
Bouchard, Carole (1997) Modelling the car design process - definition of method for styling awareness linked to the design of visible components. PhD thesis Génie industriel, ENSAM 1997ENAM0014.
This list was generated on Fri May 16 15:49:31 CEST 2008.