Abou Khalil, Bachir (2008) A method for energy and exergy analyses of product transformation processes in industry. PhD thesis Energétique, CEP- Centre Energétique et Procédés, ENSMP p.143.
Full text available as:
|
|
Abstract
Green House Gas (GHG) emissions, the nearby Peak Oil and the increase of fossil fuel prices led France to implement a national program called Energy Economy Certificates, among other actions. This program imposes on the energy suppliers, of which EDF, to generate energy savings within their sites and within their clients. For Small and Medium-sized Industries (SMIs), the costs of thorough energy analyses might be out of their means. The goal of this thesis is to develop a methodology that limits the time and cost of the analysis, as well as the number and precision of the necessary data. Existing energy and exergy analysis methodologies were reviewed in detail, pointing out their advantages and disadvantages. A Process Energy and Exergy Analysis (PEEA) method has been developed. This method includes three steps, of which the first one, called Process Analysis (PA) is fundamental and constitutes an upstream work performed one time for every type of product. This step consists in determining the Minimal Required Energy (MRE) to transform a raw material into final product, after which the Best Transformation Process is determined. The PA was applied to several unitary industrial operations in order to demonstrate the generic and systematic factors of the method. Afterwards, the method was directly applied to the analysis of a cheese manufacturing industry. Results showed that this method is applicable for every level of energy auditing (either low or high cost energy audits), and that it allows for identification of energy efficient solutions, usually not identifiable by traditional energy analysis methods.
| Item Type: | PhD Thesis (PhD) |
|---|---|
| PhD Supervisor: | Clodic, Denis |
| Date: | 12 December 2008 |
| Board of examiners: | Marchio, Dominique and Favrat, Daniel and Neveu, Pierre and Berthou, Marc and Clodic, Denis |
| Ecole Doctorale: | ED 432 ECOLE DOCTORALE SCIENCES DES METIERS DE L'INGENIEUR |
| Discipline: | Energétique |
| Collection (Fonds): | Mines ParisTech (ENSMP) |
| Institution: | ENSMP |
| Department: | CEP- Centre Energétique et Procédés |
| Subjects: | 5. Fluid Mechanics and Energy |
| Uncontrolled Keywords: | Analyse énergétique, Analyse exergétique, Méthodologie, Impact environnement, Procédé fabrication, Energy analysis, Exergy analysis, Methodology, Environmental impact, Manufacturing process |
| ID Code: | 5064 |
| Deposited By: | Claudine Abauzit |
| Deposited On: | 24 April 2009 |
References
Chapitre 1:
1. [ABO06] B, Abou Khalil, J.F Bérail, « Analyse Énergétique de Procédés, Fromagerie Bel
Cléry Le Petit », EDF R&D, 2006.
2. [AFN06] AFNOR, « Référentiel de bonnes pratiques, Diagnostic énergétique dans
l'industrie », 2006.
3. [ANA05] R. Anantharaman, O.S. Abbas, T. Gundersen. « Energy Level Composite
Curves—a new graphical methodology for the integration of energy intensive
processes », Applied Thermal Engineering, vol. XX, 2005.
4. [ASPO] Association for the Study of Peak Oil and gas : http://aspofrance.org/news/le-picde-
production-de-petrole
5. [ATE06] ATEE, Seminaire « CEE : Mode d’emploi », 25-26 avril 2006
6. [BEJ96] A. Bejan, G. Tsatsanoris et M. Moran, « Thermal Design and Optimization »,
Wiley-Interscience Publication, 1996.
7. [BOR87] L. Borel, « Thermodynamique et énergétique », Presses Polytechniques
Romances, 1987.
8. [CIA97] D. Ciambrone, « Environmental Life Cycle Analysis », Lewis Publishers, 1997.
9. [DHO91] V.R. Dhole., « Distillation column integration and overall design of subambient
plants », thèse de doctorat, UMIST, 1991.
10. [FEN97] X. Feng et X. X. Zhu, « Combining Pinch and Exergy Analysis for Process
modifications », Applied Thermal Engineerging, 1997
11. [FRA06] R. S. Frazier, « An exergy diagnostic methodology for energy management in
manufacturing », thèse de doctorat, Oklahoma State University, 2006.
12. [FRA93] C.A. Frangopoulos, M. R. Von Spakovsky, « A global environomic approach for
energy systems analysis and optimization (Part I and Part II) », International Conference
on Energy Systems Analysis and Ecology, Cracow, Poland, 1993.
13. [GIE07A] GIEC, « Résumé à l’intention des décideurs », 4ème rapport d’évaluation, 2007.
14. [GIE07B] GIEC Groupe de travail I « Rapport du Groupe de travail I du GIEC », 4ème
rapport d’évaluation, 2007.
15. [IEA07] International Energy Agency, « World energy outlook ».
16. [IFP06] Y. Mathieu, « Quelles réserves de pétrole et de gaz », conférence débat pics
pétrolier et gazier : conséquences et enjeux, 11 mai 2006.
17. [INS07] M. Beudaert « L'énergie en 2006 : nouvelle hausse des prix, recul de la
consommation, INSEE, Première No1152 juillet 2007 (http://www.insee.fr)
18. [IPC00] IPCC, SPECIAL REPORT EMISSIONS SCENARIOS
19. [IPP07] IPPC, « Draft Reference Document on Best Available Techniques in the Energy
Efficiency », 2007.
20. [KIS07] K. Kisssock, K. Hallinan, W. Bayder, M. Braungart, « Energy and Waste
Reduction Opportunities in Industrial Processes », Strategic planning for energy and the
environment, 2007.
21. [KRU01] P. Krummenacher, D. Favrat, « Indirect and Mixed Direct-Indirect Heat
Integration of Batch Processes Based on Pinch Analysis », International Journal of
Applied Thermodynamics, 2001.
22. [LEG79] P. Le Goff, « énergétique industrielle », tome 1, Technique et documentation,
1979.
23. [LIN92] B. Linnhoff, V.R. Dhole, « shaftwork target for low temperature process design »,
Chemical Engineering Science, 1992.
24. [LIN98] Linnhoff and March : « Introduction to pinch technology », 1998
25. [MIE07] Mission interministérielle sur l'effet de serre (MIES), http://www.effet-deserre.
gouv.fr/l__essentiel
26. [MIK98] J.B Mikkelsen, « Thermal energy storage systems in batch processing », Thèse
de doctorat , Technical University of Denmark, 1998.
27. [MUL07] D. Muller, F. Marechal, T. Wolewinski, P.J. Roux, « An energy management
method for the food industry », Applied Thermal Engineering, 2007.
28. [NU98] Texte du Protocole de Kyoto, http://unfccc.int
29. [SAD96] N. Sadr-Kazemi, G.T. Polley, « Design of energy storage systems for batch
process plants », Journal of Chemical Engineering, 1996.
30. [SON04] G. Sonnemann, F. Castells, M. Schumacher, « Integrated Life-Cycle and Risk
Assessment for Industrial Processes », Lewis Publishers, 2004.
31. [STA96] F. Staine, D. Favrat, « Energy integration of industrial processes based on the
pinch analysis method extended to include exergy factors », Applied Thermal
Engineering, 1996.
32. [STA95] F.Staine, « Intégration Energétique des Procédés Industriels Par la Méthode du
Pincement Etendue aux Facteurs Exergétiques », Thèse de doctorat N° 1318, Ecole
Polytechnique Fédérale de Lausanne, 1995.
33. [STO95] S. Stolltze et al., « Waste heat recovery in batch processes using heat
storage », Journal of Energy Resources Technology, vol. XX,1995.
34. [THU95] A. Thumann, P. Mehta, « Handbook of Energy Engineering » 3ème édition, The
Fairmont Press, 1995.
35. [UPS] Union Pétrolière suisse :
http://www.mazout.ch/site/erd565106/fra674237/fra600155056.asp?osLang=2#frage1
Chapitre 2:
[AFN06] AFNOR, « Référentiel de bonnes pratiques, Diagnostic énergétique dans
l'industrie », 2006.
[DOU01] H. Doudedranche, B. Camier-Caudron, J-Y.Gassi et P. SCHUCK, « Procédés de
transformation fromagère », Techniques de l’ingénieur, F 6 305, 2001.
[FEN97] X. Feng et X. X. Zhu, « Combining Pinch and Exergy Analysis for Process
modifications », Applied Thermal Engineerging, 1997.
[IPP08] IPPC, « Final Draft Reference Document on Best Available Techniques in the
Energy Efficiency », 2008.
[KIS07] K. Kissock, K. Hallinan, W. Bayder, M. Braungart, « Energy and Waste
Reduction Opportunities in Industrial Processes », Strategic planning for energy and the
environment, 2007.
[VEI79] R. Veisseyre, “Technologies du lait”, La maison rustique, Paris, France, 1979
Chapitre 3:
[ABO06a] B. Abou Khalil, J.F Bérail, « Analyse Énergétique de Procédés, Fromagerie Bel
Cléry Le Petit », EDF R&D, 2006.
[ABO06b] B. Abou Khalil, F. Sicard, N. Flach-Malaspina, « Analyse Énergétique de
Procédés, Usine de salades Bonduelle », EDF R&D, 2006.
[ADE07] ADEME, « Guide des facteurs d’émissions », 2007.
[AIM04] P. Aimar, G. Daufin, « Séparation par membrane dans l’industrie agro
alimentaire », Techniques de l’Ingénieur, dossier F3250, 2004.
[BEA03] C. Beal et I. Sodini, « fabrication des yaourts et des laits fermentés », Techniques
de l’Ingénieur, dossier F6315, 2003.
[BON08] C. Bonazzi et J.J. Bimbenet, « Séchage des produits alimentaires appareils et
applications, Techniques de l’ingénieur, dossier F3002, 2008.
[BOU01] J.L. Boutonnier, « Crèmes glacées, glaces et sorbets : formulation et
fabrication », Techniques de l’ingénieur, dossier F8010, 2001.
[BOU06] S. Bourdon et A. Baudot, « Filtration membranaire (OI, NF, UF) – Applications
diverses », Techniques de l’ingénieur, dossier J2796, 2006.
[BOU07] J.L. Boutonnier, « Matière grasse laitière », Techniques de l’ingénieur, dossier
F6321, 2007.
[DGE07] DGEMP, « Prix du Gaz et de l’électricité en Europe au 1er Janvier 2007 ».
http://www.industrie.gouv.fr/energie/statisti/f1e_stats.htm
[ENG08]. « Engineering toolbox », http://www.engineeringtoolbox.com, 2008.
[FEN97] X. Feng et X. X. Zhu, « Combining Pinch and Exergy Analysis for Process
modifications », Applied Thermal Engineerging, 1997
[GES07] G. Gésan-Guiziou, « Filtration membranaire, application à l’agoralimentaire »,
Techniques de l’Ingénieur, dossier J2795, 2007.
[GOU01] H. Goudédranche, B. Camier-Caudron, J.Y.GASSI, P.SCHUCK, « Procédés de
transformation fromagère », Techniques de l’Ingénieur, dossiers F6305, F6306 et
F6307, 2001.
[HEY00] G. HEYEN, « Analyse exergétique des systèmes industriels », Université de
Liège, 2000.
[KNE64] F. Kneule, « Le séchage », traduit par R. Lassaigne et A. Zundel, Edition
Eyrolles, 1964.
[LEG79] P. Le Goff, « énergétique industrielle », tome 1, Technique et documentation,
1979.
[LEL92] R. Leleu, « Evaporation », Techniques de l’ingénieur, dossier J2320, 1992.
[LEV01] J.Y Leveau, J.P Larpent et M. Bouix, « Securité microbiologique des procédés
alimentaires », Techniques de l’Ingénieur, dossier F1120, 2001.
[LIN92] B. Linnhoff, V.R. Dhole, « shaftwork target for low temperature process design »,
Chemical Engineering Science, 1992.
[LIN98] Linnhoff and March : « Introduction to pinch technology », 1998.
[MUR08] R. Murr, « Gains énergétiques globaux par installation des pompes à chaleur
dans un procédé agro alimentaire », Mémoire de première année de thèse, CEPEMP,
2008.
[NAD95] J.P Nadeau et J.R Puiggali, « Séchage, des processus physiques aux procédés
industriels », Techniques et documentation LAVOISIER, 1995.
[SHA98] D. Shapton, « Principles and practice for the safe processing of foods
(paperback), Woodhead publishing series in food science and technology, 1998.
[SPI08] H.E. Spinnler, « Transformation et conservation des produits agroalimentaires »,
Techniques de l’Ingénieur, dossier F3450, 2008.
[VAC93] F. Vachet, « Séchage dans l’industrie chimique », techniques de l’ingénieur,
dossier J2483, 1993.
[VEI79] R. Veisseyre, « Technologies du lait », La maison rustique, Paris, France, 1979.
Chapitre 4:
[ABO06] B, Abou Khalil, J.F Bérail, « Analyse Énergétique de Procédés, Fromagerie Bel
Cléry Le Petit », EDF R&D, 2006.
[ADE07] ADEME, « Guide des facteurs d’émissions, calcul des facteurs d’émissions et
sources bibliographiques utilisées », 2007
[DGE08] DGEMP (Direction Générale des Energies et des Matières Premières), prix des
énergies, 2008, http://www.industrie.gouv.fr/energie/statisti/f1e_stats.htm
[GOU01] H, Goudédranche, B, Camier-Caudron, J.Y. GASSI, P. SCHUCK, « Procédés de
transformation fromagère », Techniques de l’Ingénieur, dossiers F6305, F6306 et
F6307, 2001.
[LEL92] R. Leleu, « Evaporation », Techniques de l’ingénieur, dossier J2320, 1992.
[LIN98] Linnhoff and March : « Introduction to pinch technology », 1998.
[NEA08] Y, Neau, « Analyse Energétique de Procédés de la fromagerie Gillot », EDF R&D,
Rapport H-E26-2008-02970-FR, 2008.
[RUI02] S, Ruiz, « Fiche Sectorielle : La fabrication de fromages », EDF R&D, 2002, mise à
jour 2008.
[SIC06] F, Sicard, « Guide de diagnostic d'une installation de froid industriel », EDF R&D,
Rapport H-E25-2006-01354-FR, 2006.
Repository Staff Only: edit this item